• sns01
  • sns02
  • sns03
English

Special Design for Cemented Carbide Gun Drill - Carbide Rod With Coolant Hole – Toonney

Special Design for Cemented Carbide Gun Drill - Carbide Rod With Coolant Hole – Toonney Featured Image
  • Special Design for Cemented Carbide Gun Drill - Carbide Rod With Coolant Hole – Toonney

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Every single member from our large efficiency profits team values customers' requirements and organization communication for Sintering Furnace For Stainless Steel Mim Product, Cemented Rod, One Straight Hole Carbide Rod, We warmly welcome clients, enterprise associations and mates from all over the globe to speak to us and find cooperation for mutual rewards.
Special Design for Cemented Carbide Gun Drill - Carbide Rod With Coolant Hole – Toonney Detail:

iconCarbide Rods with One Coolant Duct

This blank is specially for some CNC blades or drills which needs duct for coolant to cool the increased heat during the high speed cutting or drilling. Standard specification and tolerance table please reference below.

Outer D(mm) OD Tol.(mm) Inner Hole d(mm) ID Tol.(mm) Hole center diviation value α Length（mm） L Tol.(mm)
3.0 +0.50/+0.30 0.5 ±0.10 0.10 330 +1.5
4.0 +0.50/+0.30 0.8 ±0.10 0.10 330 +1.5
5.0 +0.50/+0.30 0.8 ±0.10 0.13 330 +1.5
6.0 +0.50/+0.30 1.0 ±0.15 0.15 330 +1.5
7.0 +0.60/+0.30 1.0 ±0.15 0.15 330 +1.5
8.0 +0.60/+0.30 1.0 ±0.15 0.15 330 +1.5
9.0 +0.60/+0.30 1.4 ±0.15 0.20 330 +1.5
10.0 +0.60/+0.30 1.4 ±0.15 0.20 330 +1.5
11.0 +0.60/+0.30 1.4 ±0.15 0.28 330 +1.5
12.0 +0.60/+0.30 1.8 ±0.15 0.30 330 +1.5
13.0 +0.70/+0.30 1.8 ±0.15 0.34 330 +1.5
14.0 +0.70/+0.30 1.8 ±0.15 0.37 330 +1.5
15.0 +0.70/+0.30 2.0 ±0.20 0.40 330 +1.5
16.0 +0.70/+0.30 2.0 ±0.20 0.40 330 +1.5
17.0 +0.80/+0.30 2.0 ±0.20 0.47 330 +1.5
18.0 +0.80/+0.30 2.0 ±0.20 0.50 330 +1.5
19.0 +0.80/+0.30 2.0 ±0.20 0.50 330 +1.5
20.0 +0.80/+0.30 2.5 ±0.25 0.50 330 +1.5
21.0 +0.80/+0.30 2.5 ±0.25 0.50 330 +1.5
22.0 +0.80/+0.30 2.5 ±0.25 0.50 330 +1.5
23.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5
24.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5
25.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5
26.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5
27.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5
28.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5
29.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5
30.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5

iconCarbide Rod with Two Straight Holes

This blank is especially for some CNC blades or drills which needs duct for coolant to cool the increased heat during the high-speed cutting or drilling. Standard specification and tolerance table please reference below.

Standard pitch

Outside Dia. Ø(mm) OD Tol. (mm) Inner d(mm) ID Tol.(mm) Distance between holds Hole center diviation value α L mm Tol. (mm)
mm Tol. (mm)
6.0 +0.50/+0.30 0.8 ±0.10 1.5 ﹢0/-0.20 0.15 330 +1.5
7.0 +0.60/+0.30 0.8 ±0.10 1.5 ﹢0/-0.20 0.15 330 +1.5
8.0 +0.60/+0.30 1.0 ±0.15 1.5 ﹢0/-0.30 0.15 330 +1.5
9.0 +0.60/+0.30 1.0 ±0.15 2.6 ﹢0/-0.30 0.20 330 +1.5
10.0 +0.60/+0.30 1.0 ±0.15 2.6 ﹢0/-0.30 0.20 330 +1.5
11.0 +0.60/+0.30 1.2 ±0.15 3.6 ﹢0/-0.30 0.28 330 +1.5
12.0 +0.60/+0.30 1.2 ±0.15 3.6 ﹢0/-0.30 0.30 330 +1.5
13.0 +0.70/+0.30 1.2 ±0.15 3.6 ﹢0/-0.30 0.34 330 +1.5
14.0 +0.70/+0.30 1.5 ±0.15 5.0 ﹢0/-0.30 0.37 330 +1.5
15.0 +0.70/+0.30 1.5 ±0.15 5.0 ﹢0/-0.30 0.40 330 +1.5
16.0 +0.70/+0.30 1.5 ±0.15 5.0 ﹢0/-0.30 0.40 330 +1.5
17.0 +0.80/+0.30 2.0 ±0.20 6.2 ﹢0/-0.30 0.47 330 +1.5
18.0 +0.80/+0.30 2.0 ±0.20 6.2 ﹢0/-0.30 0.50 330 +1.5
19.0 +0.80/+0.30 2.0 ±0.20 6.2 ﹢0/-0.30 0.50 330 +1.5
20.0 +0.80/+0.30 2.0 ±0.20 6.2 ﹢0/-0.40 0.50 330 +1.5
21.0 +0.80/+0.30 2.0 ±0.20 6.2 ﹢0/-0.40 0.50 330 +1.5
22.0 +0.80/+0.30 2.0 ±0.20 6.2 ﹢0/-0.40 0.50 330 +1.5
23.0 +0.80/+0.30 2.0 ±0.20 7.5 ﹢0/-0.40 0.50 330 +1.5
24.0 +0.80/+0.30 2.0 ±0.20 7.5 ﹢0/-0.50 0.50 330 +1.5
25.0 +0.80/+0.30 2.0 ±0.20 7.5 ﹢0/-0.50 0.50 330 +1.5
26.0 +0.80/+0.30 2.0 ±0.20 7.5 ﹢0/-0.50 0.50 330 +1.5

iconCarbide Rod with Two Helical Holes

Coolant hole in the type of helical shape is one new of our product series, below is the size detail.

carbide-rod-with-three-helical-holes

D(mm) D tol. TK Tk tol hole Hole tol. Pitch L+1.0
3.3 +0.7 1.60 ±0.10 0.40 ±0.10 16.32 310/330
3.8 +0.7 1.80 ±0.10 0.50 ±0.10 19.04 310/330
4.3 +0.7 2.10 ±0.10 0.60 ±0.10 21.77 310/330
4.8 +0.7 2.25 ±0.15 0.70 ±0.10 24.49 310/330
5.3 +0.7 2.40 ±0.20 0.70 ±0.10 27.21 310/330
5.8 +0.7 2.40 ±0.20 0.70 ±0.10 29.93 310/330
6.3 +0.7 2.40 ±0.20 0.70 ±0.10 32.65 310/330
6.8 +0.7 3.30 ±0.20 1.00 ±0.15 35.37 310/330
7.3 +0.7 3.50 ±0.20 1.00 ±0.15 38.09 310/330
7.8 +0.7 3.80 ±0.20 1.00 ±0.15 40.81 310/330
8.3 +0.7 3.80 ±0.20 1.00 ±0.15 43.53 310/330
8.8 +0.7 4.20 ±0.30 1.00 ±0.15 46.25 310/330
9.3 +0.7 4.50 ±0.30 1.40 ±0.15 48.97 310/330
9.8 +0.7 4.50 ±0.30 1.40 ±0.15 51.69 310/330
10.3 +0.7 4.50 ±0.30 1.40 ±0.15 54.41 310/330
10.8 +0.7 4.50 ±0.30 1.40 ±0.15 57.13 310/330
11.3 +0.7 4.90 ±0.40 1.40 ±0.15 59.86 310/330
11.8 +0.7 5.40 ±0.40 1.40 ±0.15 62.58 310/330
12.3 +0.7 5.85 ±0.40 1.40 ±0.15 65.3 310/330
12.8 +0.7 5.85 ±0.40 1.75 ±0.20 68.02 310/330
13.3 +0.8 6.10 ±0.40 1.75 ±0.20 70.74 310/330
13.8 +0.8 6.40 ±0.40 1.75 ±0.20 73.46 310/330
14.3 +0.8 6.70 ±0.40 1.75 ±0.20 76.18 310/330
14.8 +0.8 7.00 ±0.40 1.75 ±0.20 78.9 310/330
15.3 +0.8 7.30 ±0.40 1.75 ±0.20 81.62 310/330
15.8 +0.8 7.60 ±0.40 1.75 ±0.20 84.34 310/330
16.3 +0.8 7.90 ±0.40 1.75 ±0.20 87.06 310/330
16.8 +0.8 8.20 ±0.40 1.75 ±0.20 89.78 310/330
17.3 +0.8 8.50 ±0.40 1.75 ±0.20 92.5 310/330
17.8 +0.8 8.80 ±0.40 1.75 ±0.20 95.22 310/330
18.8 +0.8 9.35 ±0.40 2.00 ±0.25 100.67 310/330
19.3 +0.8 9.70 ±0.40 2.00 ±0.25 103.39 310/330
19.8 +0.8 9.75 ±0.50 2.00 ±0.25 106.11 310/330
20.3 +0.8 9.90 ±0.50 2.00 ±0.25 108.83 310/330

iconCarbide Rod with Three Helical Holes

Some special precise end mills or drills needs 3 helical holes to get better cutting performs, we specially develop carbide rod blanks for this application. Specifications detail as below:
carbide-rod-with-three-helical-holes

Outer D
(mm)		 OD Tol.
(mm)		 TK
(mm)		 Distance Tol.
(mm)		 Inner Dia.
(mm)		 ID
(mm)		 Pitch
(mm)		 Pitch Tol.
(mm)
6 ﹢1.0/﹢0.6 2.75 -0.4 0.7 ±0.10 32.7 -0.7 0.62
8 ﹢1.4/﹢0.7 3 -0.4 1 ±0.15 43.53 -0.86 0.89
10 ﹢1.4/﹢0.7 5 -0.6 1.4 ±0.15 54.41 -1.08 1.12
12 ﹢1.4/﹢0.7 6 -0.6 1.4 ±0.15 65.3 -1.3 1.33
14 ﹢1.5/﹢0.7 7 -0.8 1.75 ±0.20 76.18 -1.51 1.56
16 ﹢1.6/﹢0.7 8 -0.8 1.75 ±0.20 87.06 -1.73 1.78
18 ﹢1.7/﹢0.7 9.55 -0.8 2 ±0.25 97.95 -1.95 2.00
20 ﹢1.7/﹢0.7 10 -1 2 ±0.25 108.83 -2.16 2.22
Length: 330+0/+1.5mm
Product detail pictures:

Special Design for Cemented Carbide Gun Drill - Carbide Rod With Coolant Hole – Toonney detail pictures

Related Product Guide:
abide by the contract", conforms on the market requirement, joins from the market competition by its good quality likewise as provides more comprehensive and superb support for customers to let them become large winner. The pursue of the company, is definitely the clients' pleasure for Special Design for Cemented Carbide Gun Drill - Carbide Rod With Coolant Hole – Toonney, The product will supply to all over the world, such as: venezuela, Mecca, Puerto Rico, We'll continue to devote ourselves to market & product development and build a well-knit service to our customer to create a more prosperous future. Please contact us today to find out how we can work together.
    • The company leader recept us warmly, through a meticulous and thorough discussion, we signed a purchase order. Hope to cooperate smoothly
    5 Stars By Joanna from Lesotho - 2018.09.21 11:01
    Cooperate with you every time is very successful, very happy. Hope that we can have more cooperation!
    5 Stars By Maria from Swaziland - 2018.12.10 19:03

    Related Products

    OEM/ODM Factory Cemented Carbide Heading Die For Nut - Hexagonal Wire Drawing Die – Toonney

    OEM/ODM Factory Cemented Carbide Heading Die Fo...

    OEM/ODM Factory Carbide Bar - Carbide End Mill – Toonney

    OEM/ODM Factory Carbide Bar - Carbide End Mill...

    OEM Factory for Tungsten Carbide Insert - Carbide Tips – Toonney

    OEM Factory for Tungsten Carbide Insert - Carb...

    2021 China New Design Cemented Carbide Wear Part - Carbide Insert – Toonney

    2021 China New Design Cemented Carbide Wear Par...

    Cheapest Price Tungsten Carbide Nozzle - Carbide Tips – Toonney

    Cheapest Price Tungsten Carbide Nozzle - Carbi...

    OEM Factory for Tungsten Carbide Insert - Carbide Cutting Tools – Toonney

    OEM Factory for Tungsten Carbide Insert - Carb...