• sns01
  • sns02
  • sns03
English

Reasonable price Cemented Carbide Unground Rod - Carbide Rod With Coolant Hole – Toonney

Reasonable price Cemented Carbide Unground Rod - Carbide Rod With Coolant Hole – Toonney Featured Image
  • Reasonable price Cemented Carbide Unground Rod - Carbide Rod With Coolant Hole – Toonney

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

With advanced technologies and facilities, strict quality control, reasonable price, superior service and close co-operation with customers, we are devoted to providing the best value for our customers for Bolt Heading Die Core, Vacuum Sintering Furnace For Copper Based Alloy, Tungsten Carbide Blank, The many thoughts and suggestions is going to be drastically appreciated! The great cooperation could boost each of us into better development!
Reasonable price Cemented Carbide Unground Rod - Carbide Rod With Coolant Hole – Toonney Detail:

iconCarbide Rods with One Coolant Duct

This blank is specially for some CNC blades or drills which needs duct for coolant to cool the increased heat during the high speed cutting or drilling. Standard specification and tolerance table please reference below.

Outer D(mm) OD Tol.(mm) Inner Hole d(mm) ID Tol.(mm) Hole center diviation value α Length（mm） L Tol.(mm)
3.0 +0.50/+0.30 0.5 ±0.10 0.10 330 +1.5
4.0 +0.50/+0.30 0.8 ±0.10 0.10 330 +1.5
5.0 +0.50/+0.30 0.8 ±0.10 0.13 330 +1.5
6.0 +0.50/+0.30 1.0 ±0.15 0.15 330 +1.5
7.0 +0.60/+0.30 1.0 ±0.15 0.15 330 +1.5
8.0 +0.60/+0.30 1.0 ±0.15 0.15 330 +1.5
9.0 +0.60/+0.30 1.4 ±0.15 0.20 330 +1.5
10.0 +0.60/+0.30 1.4 ±0.15 0.20 330 +1.5
11.0 +0.60/+0.30 1.4 ±0.15 0.28 330 +1.5
12.0 +0.60/+0.30 1.8 ±0.15 0.30 330 +1.5
13.0 +0.70/+0.30 1.8 ±0.15 0.34 330 +1.5
14.0 +0.70/+0.30 1.8 ±0.15 0.37 330 +1.5
15.0 +0.70/+0.30 2.0 ±0.20 0.40 330 +1.5
16.0 +0.70/+0.30 2.0 ±0.20 0.40 330 +1.5
17.0 +0.80/+0.30 2.0 ±0.20 0.47 330 +1.5
18.0 +0.80/+0.30 2.0 ±0.20 0.50 330 +1.5
19.0 +0.80/+0.30 2.0 ±0.20 0.50 330 +1.5
20.0 +0.80/+0.30 2.5 ±0.25 0.50 330 +1.5
21.0 +0.80/+0.30 2.5 ±0.25 0.50 330 +1.5
22.0 +0.80/+0.30 2.5 ±0.25 0.50 330 +1.5
23.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5
24.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5
25.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5
26.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5
27.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5
28.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5
29.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5
30.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5

iconCarbide Rod with Two Straight Holes

This blank is especially for some CNC blades or drills which needs duct for coolant to cool the increased heat during the high-speed cutting or drilling. Standard specification and tolerance table please reference below.

Standard pitch

Outside Dia. Ø(mm) OD Tol. (mm) Inner d(mm) ID Tol.(mm) Distance between holds Hole center diviation value α L mm Tol. (mm)
mm Tol. (mm)
6.0 +0.50/+0.30 0.8 ±0.10 1.5 ﹢0/-0.20 0.15 330 +1.5
7.0 +0.60/+0.30 0.8 ±0.10 1.5 ﹢0/-0.20 0.15 330 +1.5
8.0 +0.60/+0.30 1.0 ±0.15 1.5 ﹢0/-0.30 0.15 330 +1.5
9.0 +0.60/+0.30 1.0 ±0.15 2.6 ﹢0/-0.30 0.20 330 +1.5
10.0 +0.60/+0.30 1.0 ±0.15 2.6 ﹢0/-0.30 0.20 330 +1.5
11.0 +0.60/+0.30 1.2 ±0.15 3.6 ﹢0/-0.30 0.28 330 +1.5
12.0 +0.60/+0.30 1.2 ±0.15 3.6 ﹢0/-0.30 0.30 330 +1.5
13.0 +0.70/+0.30 1.2 ±0.15 3.6 ﹢0/-0.30 0.34 330 +1.5
14.0 +0.70/+0.30 1.5 ±0.15 5.0 ﹢0/-0.30 0.37 330 +1.5
15.0 +0.70/+0.30 1.5 ±0.15 5.0 ﹢0/-0.30 0.40 330 +1.5
16.0 +0.70/+0.30 1.5 ±0.15 5.0 ﹢0/-0.30 0.40 330 +1.5
17.0 +0.80/+0.30 2.0 ±0.20 6.2 ﹢0/-0.30 0.47 330 +1.5
18.0 +0.80/+0.30 2.0 ±0.20 6.2 ﹢0/-0.30 0.50 330 +1.5
19.0 +0.80/+0.30 2.0 ±0.20 6.2 ﹢0/-0.30 0.50 330 +1.5
20.0 +0.80/+0.30 2.0 ±0.20 6.2 ﹢0/-0.40 0.50 330 +1.5
21.0 +0.80/+0.30 2.0 ±0.20 6.2 ﹢0/-0.40 0.50 330 +1.5
22.0 +0.80/+0.30 2.0 ±0.20 6.2 ﹢0/-0.40 0.50 330 +1.5
23.0 +0.80/+0.30 2.0 ±0.20 7.5 ﹢0/-0.40 0.50 330 +1.5
24.0 +0.80/+0.30 2.0 ±0.20 7.5 ﹢0/-0.50 0.50 330 +1.5
25.0 +0.80/+0.30 2.0 ±0.20 7.5 ﹢0/-0.50 0.50 330 +1.5
26.0 +0.80/+0.30 2.0 ±0.20 7.5 ﹢0/-0.50 0.50 330 +1.5

iconCarbide Rod with Two Helical Holes

Coolant hole in the type of helical shape is one new of our product series, below is the size detail.

carbide-rod-with-three-helical-holes

D(mm) D tol. TK Tk tol hole Hole tol. Pitch L+1.0
3.3 +0.7 1.60 ±0.10 0.40 ±0.10 16.32 310/330
3.8 +0.7 1.80 ±0.10 0.50 ±0.10 19.04 310/330
4.3 +0.7 2.10 ±0.10 0.60 ±0.10 21.77 310/330
4.8 +0.7 2.25 ±0.15 0.70 ±0.10 24.49 310/330
5.3 +0.7 2.40 ±0.20 0.70 ±0.10 27.21 310/330
5.8 +0.7 2.40 ±0.20 0.70 ±0.10 29.93 310/330
6.3 +0.7 2.40 ±0.20 0.70 ±0.10 32.65 310/330
6.8 +0.7 3.30 ±0.20 1.00 ±0.15 35.37 310/330
7.3 +0.7 3.50 ±0.20 1.00 ±0.15 38.09 310/330
7.8 +0.7 3.80 ±0.20 1.00 ±0.15 40.81 310/330
8.3 +0.7 3.80 ±0.20 1.00 ±0.15 43.53 310/330
8.8 +0.7 4.20 ±0.30 1.00 ±0.15 46.25 310/330
9.3 +0.7 4.50 ±0.30 1.40 ±0.15 48.97 310/330
9.8 +0.7 4.50 ±0.30 1.40 ±0.15 51.69 310/330
10.3 +0.7 4.50 ±0.30 1.40 ±0.15 54.41 310/330
10.8 +0.7 4.50 ±0.30 1.40 ±0.15 57.13 310/330
11.3 +0.7 4.90 ±0.40 1.40 ±0.15 59.86 310/330
11.8 +0.7 5.40 ±0.40 1.40 ±0.15 62.58 310/330
12.3 +0.7 5.85 ±0.40 1.40 ±0.15 65.3 310/330
12.8 +0.7 5.85 ±0.40 1.75 ±0.20 68.02 310/330
13.3 +0.8 6.10 ±0.40 1.75 ±0.20 70.74 310/330
13.8 +0.8 6.40 ±0.40 1.75 ±0.20 73.46 310/330
14.3 +0.8 6.70 ±0.40 1.75 ±0.20 76.18 310/330
14.8 +0.8 7.00 ±0.40 1.75 ±0.20 78.9 310/330
15.3 +0.8 7.30 ±0.40 1.75 ±0.20 81.62 310/330
15.8 +0.8 7.60 ±0.40 1.75 ±0.20 84.34 310/330
16.3 +0.8 7.90 ±0.40 1.75 ±0.20 87.06 310/330
16.8 +0.8 8.20 ±0.40 1.75 ±0.20 89.78 310/330
17.3 +0.8 8.50 ±0.40 1.75 ±0.20 92.5 310/330
17.8 +0.8 8.80 ±0.40 1.75 ±0.20 95.22 310/330
18.8 +0.8 9.35 ±0.40 2.00 ±0.25 100.67 310/330
19.3 +0.8 9.70 ±0.40 2.00 ±0.25 103.39 310/330
19.8 +0.8 9.75 ±0.50 2.00 ±0.25 106.11 310/330
20.3 +0.8 9.90 ±0.50 2.00 ±0.25 108.83 310/330

iconCarbide Rod with Three Helical Holes

Some special precise end mills or drills needs 3 helical holes to get better cutting performs, we specially develop carbide rod blanks for this application. Specifications detail as below:
carbide-rod-with-three-helical-holes

Outer D
(mm)		 OD Tol.
(mm)		 TK
(mm)		 Distance Tol.
(mm)		 Inner Dia.
(mm)		 ID
(mm)		 Pitch
(mm)		 Pitch Tol.
(mm)
6 ﹢1.0/﹢0.6 2.75 -0.4 0.7 ±0.10 32.7 -0.7 0.62
8 ﹢1.4/﹢0.7 3 -0.4 1 ±0.15 43.53 -0.86 0.89
10 ﹢1.4/﹢0.7 5 -0.6 1.4 ±0.15 54.41 -1.08 1.12
12 ﹢1.4/﹢0.7 6 -0.6 1.4 ±0.15 65.3 -1.3 1.33
14 ﹢1.5/﹢0.7 7 -0.8 1.75 ±0.20 76.18 -1.51 1.56
16 ﹢1.6/﹢0.7 8 -0.8 1.75 ±0.20 87.06 -1.73 1.78
18 ﹢1.7/﹢0.7 9.55 -0.8 2 ±0.25 97.95 -1.95 2.00
20 ﹢1.7/﹢0.7 10 -1 2 ±0.25 108.83 -2.16 2.22
Length: 330+0/+1.5mm
Product detail pictures:

Reasonable price Cemented Carbide Unground Rod - Carbide Rod With Coolant Hole – Toonney detail pictures

Related Product Guide:
We always follow the principle "Quality Very first, Prestige Supreme". We have been fully committed to delivering our customers with competitively priced high-quality products and solutions, prompt delivery and experienced services for Reasonable price Cemented Carbide Unground Rod - Carbide Rod With Coolant Hole – Toonney, The product will supply to all over the world, such as: Hongkong, New York, New Zealand, We aim to become the modern enterprise with the commercial ideal of "Sincerity and confidence" and with the aim of "Offering customers the most sincere services and best quality products". We sincerely ask for your unchanged support and appreciate your kind advice and guidance.
    • It is not easy to find such a professional and responsible provider in today's time. Hope that we can maintain long-term cooperation.
    5 Stars By Clara from Montpellier - 2018.11.06 10:04
    Cooperate with you every time is very successful, very happy. Hope that we can have more cooperation!
    5 Stars By Bertha from Turin - 2018.10.09 19:07

    Related Products

    China Cheap price Carbide Heading Die Core - Hexagonal Wire Drawing Die – Toonney

    China Cheap price Carbide Heading Die Core - H...

    Factory directly Ball Nose Endmill For Steel - Carbide End Mill – Toonney

    Factory directly Ball Nose Endmill For Steel -...

    PriceList for Carbide Heading Die Core For Nut - Hexagonal Wire Drawing Die – Toonney

    PriceList for Carbide Heading Die Core For Nut ...

    China wholesale Cemented Carbide Strip - Carbide Strip – Toonney

    China wholesale Cemented Carbide Strip - Carbi...

    Newly Arrival 3 Flutes Square Endmill - Carbide End Mill – Toonney

    Newly Arrival 3 Flutes Square Endmill - Carbid...

    Quality Inspection for Tungsten Carbide Punching Die - Hexagonal Wire Drawing Die – Toonney

    Quality Inspection for Tungsten Carbide Punchin...