• sns01
  • sns02
  • sns03
English

One of Hottest for Cemented Carbide Rod With Three Helix Holes - Carbide Rod With Coolant Hole – Toonney

One of Hottest for Cemented Carbide Rod With Three Helix Holes - Carbide Rod With Coolant Hole – Toonney Featured Image
  • One of Hottest for Cemented Carbide Rod With Three Helix Holes - Carbide Rod With Coolant Hole – Toonney

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Sticking for the perception of "Creating goods of high quality and making good friends with people today from all around the world", we constantly set the interest of shoppers to begin with for Waist Hole Tungsten Carbide Gun Drill, Tungsten Carbide Strip, 3 Flutes Square Endmill, "Quality", "honesty" and "service" is our principle. Our loyalty and commitments remain respectfully at your service. Contact Us Today For further information, contact us now.
One of Hottest for Cemented Carbide Rod With Three Helix Holes - Carbide Rod With Coolant Hole – Toonney Detail:

iconCarbide Rods with One Coolant Duct

This blank is specially for some CNC blades or drills which needs duct for coolant to cool the increased heat during the high speed cutting or drilling. Standard specification and tolerance table please reference below.

Outer D(mm) OD Tol.(mm) Inner Hole d(mm) ID Tol.(mm) Hole center diviation value α Length（mm） L Tol.(mm)
3.0 +0.50/+0.30 0.5 ±0.10 0.10 330 +1.5
4.0 +0.50/+0.30 0.8 ±0.10 0.10 330 +1.5
5.0 +0.50/+0.30 0.8 ±0.10 0.13 330 +1.5
6.0 +0.50/+0.30 1.0 ±0.15 0.15 330 +1.5
7.0 +0.60/+0.30 1.0 ±0.15 0.15 330 +1.5
8.0 +0.60/+0.30 1.0 ±0.15 0.15 330 +1.5
9.0 +0.60/+0.30 1.4 ±0.15 0.20 330 +1.5
10.0 +0.60/+0.30 1.4 ±0.15 0.20 330 +1.5
11.0 +0.60/+0.30 1.4 ±0.15 0.28 330 +1.5
12.0 +0.60/+0.30 1.8 ±0.15 0.30 330 +1.5
13.0 +0.70/+0.30 1.8 ±0.15 0.34 330 +1.5
14.0 +0.70/+0.30 1.8 ±0.15 0.37 330 +1.5
15.0 +0.70/+0.30 2.0 ±0.20 0.40 330 +1.5
16.0 +0.70/+0.30 2.0 ±0.20 0.40 330 +1.5
17.0 +0.80/+0.30 2.0 ±0.20 0.47 330 +1.5
18.0 +0.80/+0.30 2.0 ±0.20 0.50 330 +1.5
19.0 +0.80/+0.30 2.0 ±0.20 0.50 330 +1.5
20.0 +0.80/+0.30 2.5 ±0.25 0.50 330 +1.5
21.0 +0.80/+0.30 2.5 ±0.25 0.50 330 +1.5
22.0 +0.80/+0.30 2.5 ±0.25 0.50 330 +1.5
23.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5
24.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5
25.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5
26.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5
27.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5
28.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5
29.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5
30.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5

iconCarbide Rod with Two Straight Holes

This blank is especially for some CNC blades or drills which needs duct for coolant to cool the increased heat during the high-speed cutting or drilling. Standard specification and tolerance table please reference below.

Standard pitch

Outside Dia. Ø(mm) OD Tol. (mm) Inner d(mm) ID Tol.(mm) Distance between holds Hole center diviation value α L mm Tol. (mm)
mm Tol. (mm)
6.0 +0.50/+0.30 0.8 ±0.10 1.5 ﹢0/-0.20 0.15 330 +1.5
7.0 +0.60/+0.30 0.8 ±0.10 1.5 ﹢0/-0.20 0.15 330 +1.5
8.0 +0.60/+0.30 1.0 ±0.15 1.5 ﹢0/-0.30 0.15 330 +1.5
9.0 +0.60/+0.30 1.0 ±0.15 2.6 ﹢0/-0.30 0.20 330 +1.5
10.0 +0.60/+0.30 1.0 ±0.15 2.6 ﹢0/-0.30 0.20 330 +1.5
11.0 +0.60/+0.30 1.2 ±0.15 3.6 ﹢0/-0.30 0.28 330 +1.5
12.0 +0.60/+0.30 1.2 ±0.15 3.6 ﹢0/-0.30 0.30 330 +1.5
13.0 +0.70/+0.30 1.2 ±0.15 3.6 ﹢0/-0.30 0.34 330 +1.5
14.0 +0.70/+0.30 1.5 ±0.15 5.0 ﹢0/-0.30 0.37 330 +1.5
15.0 +0.70/+0.30 1.5 ±0.15 5.0 ﹢0/-0.30 0.40 330 +1.5
16.0 +0.70/+0.30 1.5 ±0.15 5.0 ﹢0/-0.30 0.40 330 +1.5
17.0 +0.80/+0.30 2.0 ±0.20 6.2 ﹢0/-0.30 0.47 330 +1.5
18.0 +0.80/+0.30 2.0 ±0.20 6.2 ﹢0/-0.30 0.50 330 +1.5
19.0 +0.80/+0.30 2.0 ±0.20 6.2 ﹢0/-0.30 0.50 330 +1.5
20.0 +0.80/+0.30 2.0 ±0.20 6.2 ﹢0/-0.40 0.50 330 +1.5
21.0 +0.80/+0.30 2.0 ±0.20 6.2 ﹢0/-0.40 0.50 330 +1.5
22.0 +0.80/+0.30 2.0 ±0.20 6.2 ﹢0/-0.40 0.50 330 +1.5
23.0 +0.80/+0.30 2.0 ±0.20 7.5 ﹢0/-0.40 0.50 330 +1.5
24.0 +0.80/+0.30 2.0 ±0.20 7.5 ﹢0/-0.50 0.50 330 +1.5
25.0 +0.80/+0.30 2.0 ±0.20 7.5 ﹢0/-0.50 0.50 330 +1.5
26.0 +0.80/+0.30 2.0 ±0.20 7.5 ﹢0/-0.50 0.50 330 +1.5

iconCarbide Rod with Two Helical Holes

Coolant hole in the type of helical shape is one new of our product series, below is the size detail.

carbide-rod-with-three-helical-holes

D(mm) D tol. TK Tk tol hole Hole tol. Pitch L+1.0
3.3 +0.7 1.60 ±0.10 0.40 ±0.10 16.32 310/330
3.8 +0.7 1.80 ±0.10 0.50 ±0.10 19.04 310/330
4.3 +0.7 2.10 ±0.10 0.60 ±0.10 21.77 310/330
4.8 +0.7 2.25 ±0.15 0.70 ±0.10 24.49 310/330
5.3 +0.7 2.40 ±0.20 0.70 ±0.10 27.21 310/330
5.8 +0.7 2.40 ±0.20 0.70 ±0.10 29.93 310/330
6.3 +0.7 2.40 ±0.20 0.70 ±0.10 32.65 310/330
6.8 +0.7 3.30 ±0.20 1.00 ±0.15 35.37 310/330
7.3 +0.7 3.50 ±0.20 1.00 ±0.15 38.09 310/330
7.8 +0.7 3.80 ±0.20 1.00 ±0.15 40.81 310/330
8.3 +0.7 3.80 ±0.20 1.00 ±0.15 43.53 310/330
8.8 +0.7 4.20 ±0.30 1.00 ±0.15 46.25 310/330
9.3 +0.7 4.50 ±0.30 1.40 ±0.15 48.97 310/330
9.8 +0.7 4.50 ±0.30 1.40 ±0.15 51.69 310/330
10.3 +0.7 4.50 ±0.30 1.40 ±0.15 54.41 310/330
10.8 +0.7 4.50 ±0.30 1.40 ±0.15 57.13 310/330
11.3 +0.7 4.90 ±0.40 1.40 ±0.15 59.86 310/330
11.8 +0.7 5.40 ±0.40 1.40 ±0.15 62.58 310/330
12.3 +0.7 5.85 ±0.40 1.40 ±0.15 65.3 310/330
12.8 +0.7 5.85 ±0.40 1.75 ±0.20 68.02 310/330
13.3 +0.8 6.10 ±0.40 1.75 ±0.20 70.74 310/330
13.8 +0.8 6.40 ±0.40 1.75 ±0.20 73.46 310/330
14.3 +0.8 6.70 ±0.40 1.75 ±0.20 76.18 310/330
14.8 +0.8 7.00 ±0.40 1.75 ±0.20 78.9 310/330
15.3 +0.8 7.30 ±0.40 1.75 ±0.20 81.62 310/330
15.8 +0.8 7.60 ±0.40 1.75 ±0.20 84.34 310/330
16.3 +0.8 7.90 ±0.40 1.75 ±0.20 87.06 310/330
16.8 +0.8 8.20 ±0.40 1.75 ±0.20 89.78 310/330
17.3 +0.8 8.50 ±0.40 1.75 ±0.20 92.5 310/330
17.8 +0.8 8.80 ±0.40 1.75 ±0.20 95.22 310/330
18.8 +0.8 9.35 ±0.40 2.00 ±0.25 100.67 310/330
19.3 +0.8 9.70 ±0.40 2.00 ±0.25 103.39 310/330
19.8 +0.8 9.75 ±0.50 2.00 ±0.25 106.11 310/330
20.3 +0.8 9.90 ±0.50 2.00 ±0.25 108.83 310/330

iconCarbide Rod with Three Helical Holes

Some special precise end mills or drills needs 3 helical holes to get better cutting performs, we specially develop carbide rod blanks for this application. Specifications detail as below:
carbide-rod-with-three-helical-holes

Outer D
(mm)		 OD Tol.
(mm)		 TK
(mm)		 Distance Tol.
(mm)		 Inner Dia.
(mm)		 ID
(mm)		 Pitch
(mm)		 Pitch Tol.
(mm)
6 ﹢1.0/﹢0.6 2.75 -0.4 0.7 ±0.10 32.7 -0.7 0.62
8 ﹢1.4/﹢0.7 3 -0.4 1 ±0.15 43.53 -0.86 0.89
10 ﹢1.4/﹢0.7 5 -0.6 1.4 ±0.15 54.41 -1.08 1.12
12 ﹢1.4/﹢0.7 6 -0.6 1.4 ±0.15 65.3 -1.3 1.33
14 ﹢1.5/﹢0.7 7 -0.8 1.75 ±0.20 76.18 -1.51 1.56
16 ﹢1.6/﹢0.7 8 -0.8 1.75 ±0.20 87.06 -1.73 1.78
18 ﹢1.7/﹢0.7 9.55 -0.8 2 ±0.25 97.95 -1.95 2.00
20 ﹢1.7/﹢0.7 10 -1 2 ±0.25 108.83 -2.16 2.22
Length: 330+0/+1.5mm
Product detail pictures:

One of Hottest for Cemented Carbide Rod With Three Helix Holes - Carbide Rod With Coolant Hole – Toonney detail pictures

Related Product Guide:
So that you can finest fulfill client's demands, all of our operations are strictly performed in line with our motto "High Excellent, Competitive Price, Fast Service" for One of Hottest for Cemented Carbide Rod With Three Helix Holes - Carbide Rod With Coolant Hole – Toonney, The product will supply to all over the world, such as: Malta, Bangladesh, Hongkong, Business philosophy: Take the customer as the Center, take the quality as the life, integrity, responsibility, focus, innovation.We will provide professional, quality in return for the trust of customers, with most major global suppliers，all of our employees will work together and move forward together.
    • It is a very good, very rare business partners, looking forward to the next more perfect cooperation!
    5 Stars By Pamela from Danish - 2017.12.02 14:11
    Sales manager is very enthusiastic and professional, gave us a great concessions and product quality is very good,thank you very much!
    5 Stars By Ivy from Lebanon - 2018.11.06 10:04

    Related Products

    China New Product 4 Flutes Square Endmill - Carbide Insert – Toonney

    China New Product 4 Flutes Square Endmill - Ca...

    Competitive Price for Cemented Carbide Drawing Die - Drawing Die – Toonney

    Competitive Price for Cemented Carbide Drawing ...

    Popular Design for Corner Radius Endmill For Steel - Carbide Tips – Toonney

    Popular Design for Corner Radius Endmill For St...

    Hot New Products Bolt Heading Die Core - Progressive Die/Punching Die – Toonney

    Hot New Products Bolt Heading Die Core - Progr...

    Top Quality Cemented Carbide Die For Screw - Carbide Blank – Toonney

    Top Quality Cemented Carbide Die For Screw - C...

    Factory wholesale Vacuum Sintering Furnace For Ndfeb Materials - Sintering HIP Furnace – Toonney

    Factory wholesale Vacuum Sintering Furnace For ...