OEM/ODM Manufacturer Tungsten Carbide Rod With One Straight Hole - Carbide Rod With Coolant Hole – Toonney

Short Description:

Product Detail

Product Tags

Feedback (2)

We're committed to providing easy,time-saving and money-saving one-stop purchasing service of consumer for Powder Metallurgy Carbide Die, Powder Metallurgy Cemented Carbide Die, Carbide Cutter, Welcome to set up long-term relationship with us. Best Price For Good Quality in China.

OEM/ODM Manufacturer Tungsten Carbide Rod With One Straight Hole - Carbide Rod With Coolant Hole – Toonney Detail:

Carbide Rods with One Coolant Duct

This blank is specially for some CNC blades or drills which needs duct for coolant to cool the increased heat during the high speed cutting or drilling. Standard specification and tolerance table please reference below.

Outer D(mm)	OD Tol.(mm)	Inner Hole d(mm)	ID Tol.(mm)	Hole center diviation value α	Length（mm）	L Tol.(mm)
3.0	+0.50/+0.30	0.5	±0.10	0.10	330	+1.5
4.0	+0.50/+0.30	0.8	±0.10	0.10	330	+1.5
5.0	+0.50/+0.30	0.8	±0.10	0.13	330	+1.5
6.0	+0.50/+0.30	1.0	±0.15	0.15	330	+1.5
7.0	+0.60/+0.30	1.0	±0.15	0.15	330	+1.5
8.0	+0.60/+0.30	1.0	±0.15	0.15	330	+1.5
9.0	+0.60/+0.30	1.4	±0.15	0.20	330	+1.5
10.0	+0.60/+0.30	1.4	±0.15	0.20	330	+1.5
11.0	+0.60/+0.30	1.4	±0.15	0.28	330	+1.5
12.0	+0.60/+0.30	1.8	±0.15	0.30	330	+1.5
13.0	+0.70/+0.30	1.8	±0.15	0.34	330	+1.5
14.0	+0.70/+0.30	1.8	±0.15	0.37	330	+1.5
15.0	+0.70/+0.30	2.0	±0.20	0.40	330	+1.5
16.0	+0.70/+0.30	2.0	±0.20	0.40	330	+1.5
17.0	+0.80/+0.30	2.0	±0.20	0.47	330	+1.5
18.0	+0.80/+0.30	2.0	±0.20	0.50	330	+1.5
19.0	+0.80/+0.30	2.0	±0.20	0.50	330	+1.5
20.0	+0.80/+0.30	2.5	±0.25	0.50	330	+1.5
21.0	+0.80/+0.30	2.5	±0.25	0.50	330	+1.5
22.0	+0.80/+0.30	2.5	±0.25	0.50	330	+1.5
23.0	+0.80/+0.30	3.0	±0.25	0.50	330	+1.5
24.0	+0.80/+0.30	3.0	±0.25	0.50	330	+1.5
25.0	+0.80/+0.30	3.0	±0.25	0.50	330	+1.5
26.0	+0.80/+0.30	3.0	±0.25	0.50	330	+1.5
27.0	+0.80/+0.30	3.0	±0.25	0.50	330	+1.5
28.0	+0.80/+0.30	3.0	±0.25	0.50	330	+1.5
29.0	+0.80/+0.30	3.0	±0.25	0.50	330	+1.5
30.0	+0.80/+0.30	3.0	±0.25	0.50	330	+1.5

Carbide Rod with Two Straight Holes

This blank is especially for some CNC blades or drills which needs duct for coolant to cool the increased heat during the high-speed cutting or drilling. Standard specification and tolerance table please reference below.

Standard pitch

Outside Dia. Ø(mm)	OD Tol. (mm)	Inner d(mm)	ID Tol.(mm)	Distance between holds		Hole center diviation value α	L mm	Tol. (mm)
Outside Dia. Ø(mm)	OD Tol. (mm)	Inner d(mm)	ID Tol.(mm)	mm	Tol. (mm)	Hole center diviation value α	L mm	Tol. (mm)
6.0	+0.50/+0.30	0.8	±0.10	1.5	﹢0/-0.20	0.15	330	+1.5
7.0	+0.60/+0.30	0.8	±0.10	1.5	﹢0/-0.20	0.15	330	+1.5
8.0	+0.60/+0.30	1.0	±0.15	1.5	﹢0/-0.30	0.15	330	+1.5
9.0	+0.60/+0.30	1.0	±0.15	2.6	﹢0/-0.30	0.20	330	+1.5
10.0	+0.60/+0.30	1.0	±0.15	2.6	﹢0/-0.30	0.20	330	+1.5
11.0	+0.60/+0.30	1.2	±0.15	3.6	﹢0/-0.30	0.28	330	+1.5
12.0	+0.60/+0.30	1.2	±0.15	3.6	﹢0/-0.30	0.30	330	+1.5
13.0	+0.70/+0.30	1.2	±0.15	3.6	﹢0/-0.30	0.34	330	+1.5
14.0	+0.70/+0.30	1.5	±0.15	5.0	﹢0/-0.30	0.37	330	+1.5
15.0	+0.70/+0.30	1.5	±0.15	5.0	﹢0/-0.30	0.40	330	+1.5
16.0	+0.70/+0.30	1.5	±0.15	5.0	﹢0/-0.30	0.40	330	+1.5
17.0	+0.80/+0.30	2.0	±0.20	6.2	﹢0/-0.30	0.47	330	+1.5
18.0	+0.80/+0.30	2.0	±0.20	6.2	﹢0/-0.30	0.50	330	+1.5
19.0	+0.80/+0.30	2.0	±0.20	6.2	﹢0/-0.30	0.50	330	+1.5
20.0	+0.80/+0.30	2.0	±0.20	6.2	﹢0/-0.40	0.50	330	+1.5
21.0	+0.80/+0.30	2.0	±0.20	6.2	﹢0/-0.40	0.50	330	+1.5
22.0	+0.80/+0.30	2.0	±0.20	6.2	﹢0/-0.40	0.50	330	+1.5
23.0	+0.80/+0.30	2.0	±0.20	7.5	﹢0/-0.40	0.50	330	+1.5
24.0	+0.80/+0.30	2.0	±0.20	7.5	﹢0/-0.50	0.50	330	+1.5
25.0	+0.80/+0.30	2.0	±0.20	7.5	﹢0/-0.50	0.50	330	+1.5
26.0	+0.80/+0.30	2.0	±0.20	7.5	﹢0/-0.50	0.50	330	+1.5

Carbide Rod with Two Helical Holes

Coolant hole in the type of helical shape is one new of our product series, below is the size detail.

carbide-rod-with-three-helical-holes

D(mm)	D tol.	TK	Tk tol	hole	Hole tol.	Pitch	L+1.0
3.3	+0.7	1.60	±0.10	0.40	±0.10	16.32	310/330
3.8	+0.7	1.80	±0.10	0.50	±0.10	19.04	310/330
4.3	+0.7	2.10	±0.10	0.60	±0.10	21.77	310/330
4.8	+0.7	2.25	±0.15	0.70	±0.10	24.49	310/330
5.3	+0.7	2.40	±0.20	0.70	±0.10	27.21	310/330
5.8	+0.7	2.40	±0.20	0.70	±0.10	29.93	310/330
6.3	+0.7	2.40	±0.20	0.70	±0.10	32.65	310/330
6.8	+0.7	3.30	±0.20	1.00	±0.15	35.37	310/330
7.3	+0.7	3.50	±0.20	1.00	±0.15	38.09	310/330
7.8	+0.7	3.80	±0.20	1.00	±0.15	40.81	310/330
8.3	+0.7	3.80	±0.20	1.00	±0.15	43.53	310/330
8.8	+0.7	4.20	±0.30	1.00	±0.15	46.25	310/330
9.3	+0.7	4.50	±0.30	1.40	±0.15	48.97	310/330
9.8	+0.7	4.50	±0.30	1.40	±0.15	51.69	310/330
10.3	+0.7	4.50	±0.30	1.40	±0.15	54.41	310/330
10.8	+0.7	4.50	±0.30	1.40	±0.15	57.13	310/330
11.3	+0.7	4.90	±0.40	1.40	±0.15	59.86	310/330
11.8	+0.7	5.40	±0.40	1.40	±0.15	62.58	310/330
12.3	+0.7	5.85	±0.40	1.40	±0.15	65.3	310/330
12.8	+0.7	5.85	±0.40	1.75	±0.20	68.02	310/330
13.3	+0.8	6.10	±0.40	1.75	±0.20	70.74	310/330
13.8	+0.8	6.40	±0.40	1.75	±0.20	73.46	310/330
14.3	+0.8	6.70	±0.40	1.75	±0.20	76.18	310/330
14.8	+0.8	7.00	±0.40	1.75	±0.20	78.9	310/330
15.3	+0.8	7.30	±0.40	1.75	±0.20	81.62	310/330
15.8	+0.8	7.60	±0.40	1.75	±0.20	84.34	310/330
16.3	+0.8	7.90	±0.40	1.75	±0.20	87.06	310/330
16.8	+0.8	8.20	±0.40	1.75	±0.20	89.78	310/330
17.3	+0.8	8.50	±0.40	1.75	±0.20	92.5	310/330
17.8	+0.8	8.80	±0.40	1.75	±0.20	95.22	310/330
18.8	+0.8	9.35	±0.40	2.00	±0.25	100.67	310/330
19.3	+0.8	9.70	±0.40	2.00	±0.25	103.39	310/330
19.8	+0.8	9.75	±0.50	2.00	±0.25	106.11	310/330
20.3	+0.8	9.90	±0.50	2.00	±0.25	108.83	310/330

Carbide Rod with Three Helical Holes

Some special precise end mills or drills needs 3 helical holes to get better cutting performs, we specially develop carbide rod blanks for this application. Specifications detail as below:
carbide-rod-with-three-helical-holes

Outer D (mm)	OD Tol. (mm)	TK (mm)	Distance Tol. (mm)	Inner Dia. (mm)	ID (mm)	Pitch (mm)	Pitch Tol. (mm)
6	﹢1.0/﹢0.6	2.75	-0.4	0.7	±0.10	32.7	-0.7	0.62
8	﹢1.4/﹢0.7	3	-0.4	1	±0.15	43.53	-0.86	0.89
10	﹢1.4/﹢0.7	5	-0.6	1.4	±0.15	54.41	-1.08	1.12
12	﹢1.4/﹢0.7	6	-0.6	1.4	±0.15	65.3	-1.3	1.33
14	﹢1.5/﹢0.7	7	-0.8	1.75	±0.20	76.18	-1.51	1.56
16	﹢1.6/﹢0.7	8	-0.8	1.75	±0.20	87.06	-1.73	1.78
18	﹢1.7/﹢0.7	9.55	-0.8	2	±0.25	97.95	-1.95	2.00
20	﹢1.7/﹢0.7	10	-1	2	±0.25	108.83	-2.16	2.22
Length: 330+0/+1.5mm

Product detail pictures:

Related Product Guide:

To create extra value for customers is our enterprise philosophy; buyer growing is our working chase for OEM/ODM Manufacturer Tungsten Carbide Rod With One Straight Hole - Carbide Rod With Coolant Hole – Toonney, The product will supply to all over the world, such as: French, San Diego, Maldives, Many years of work experience, we have realized the importance of providing good quality products and the best before-sales and after-sales services. Most problems between suppliers and clients are due to poor communication. Culturally, suppliers can be reluctant to question things they do not understand. We break down those barriers to ensure you get what you want to the level you expect, when you want it. faster delivery time and the product you want is our Criterion .

Carbide Rod For Cutting Tools

Carbide Rod With 30° Helix Holes

Carbide Unground Rod

Cemented Carbide Gun Drill With Two Holes

Cemented Carbide Rod With Two Helix Holes

Tungsten Carbide Gun Drill With Two Holes

Tungsten Carbide Rod H6

Two Helix Holes Carbide Rod

Two Holes Tungsten Carbide Gun Drill

Y Shape Holes Cemented Carbide Rod

Product variety is complete, good quality and inexpensive, the delivery is fast and transport is security, very good, we are happy to cooperate with a reputable company!