Hot sale Cemented Carbide Preform - Solid Carbide Rods – Toonney
Hot sale Cemented Carbide Preform - Solid Carbide Rods – Toonney Detail:
Introduction of Solid Carbide Rods
Solid carbide rod is mainly made of tungsten carbide, binder metal cobalt and some other functional ingredients added as formula requires, through materials mixture, extruding, pre-sinter, shape modification producing process then sintered in low pressure. With characters of high hardness, high strength, chemical stable, low expansion coefficient, electric and heat conducting, the sintered tungsten carbide rods are widely applied in industrial manufacture area, for example, to make micro drill in PCB industry, electrode bar in optical community industry, drill, drill stock, tip, pusher, wear resistant precision parts, CNC reamer and blades with coolant hole in machining industry.
As a carbide depot, Toonney tungsten metal plant factory manufactures a large range of tungsten alloy including solid rods, rods with straight/spiral coolant hole, shaped rods according customer’s requirement and T shaped etc.
Solid tungsten carbide rods, no coolant ducts inside. We have 10 grades formula material for most common use, for example, rods for PCB micro drill, micro milling cutter, carbide saw blade, drills to machining aluminum alloy, copper base alloy, steel base alloy and; wolfram carbide etc. We strictly control the quality in each necessary step, we can say good quality is one of advantages which makes us stand in this industry.
Wolfram carbide:Wolfram carbide is a compound composed of wolfram and carbide. It is a black hexagonal crystal with metallic luster, of which hardness is similar to diamond.Wolfram carbide is good conductor of electric and heat, can not dissolves in water,hydrochloric acid or sulfuric acid,but easily to dissolve in mixed solution of nitric acid and hydrofluoric acid. Pure wolfram carbide is fragile, but adding titanium or cobalt and sintered,the roughness will be much higher. Wolfram carbide is also called tungsten carbide.
Tungsten metal/Tungsten metallic: Tungsten is also called wolfram, the most form of tungsten metal in industrial application is tungsten carbide. Toonney tungsten metal factory has produced solid carbide rods for many years and gets good reputation at home and abroad.
Packaging Details: Plastic bag, then protected in foam lay, finally to an outer carton.
Samples Matters: Solid carbide rods which can be available from our common regular inventory, can be offered as samples for free. For solid carbide rods with irregular customer special required, will be charged. Of course, customers need to pay for the shipping fee. Usually, the lead time of the samples will be within 7working days.
Minimum Order Quantity: There is no minimum order quantity of solid carbide rods for the first trial order. But on the second order, the total amount of solid carbide rods should be not less than 1000 USD.
Delivery Time: 7-15 working days
Cutting Tools Grade Table and Application
Grade | Co % | Grain Siz(μm) | Density(g/cm3) | Hardness(HRA) | TRS(N/mm2) |
TU90 | 9.0 | 0.2 | 14.35 | 94.1 | 5200 |
TF06 | 6.0 | 0.6 | 14.81 | 93.1 | 4000 |
TU06 | 6.0 | 0.4 | 14.8 | 94.3 | 4600 |
TU08 | 8.0 | 0.4 | 14.52 | 93.5 | 4800 |
TU08S | 8.0 | 0.3 | 14.5 | 93.6 | 5000 |
TU40 | 10.0 | 0.8 | 14.4 | 91.7 | 4600 |
TU40F | 10.0 | 0.6 | 14.45 | 92.3 | 4600 |
TU40S | 10.0 | 0.5 | 14.5 | 92.5 | 4800 |
TU44 | 12.0 | 0.4 | 14.1 | 92.6 | 4800 |
TU25 | 12.0 | 0.6 | 14.06 | 92.5 | 4200 |
TU45 | 13.0 | 0.3 | 13.95 | 92.7 | 4800 |
TU55 | 13.0 | 0.3 | 13.92 | 92.6 | 4800 |
Recommanded Application
Grade | Recommanded application |
TU90 | For cutting tools machining quesnched material(HRC65-70),hardwood and high polishing cutters. Excellent for cutters finish machining 316L stinless steel |
TF06 | For cutting tools machining aluminum magnesium alloy,graphite and composite fiber. |
TU06 | For PCB micro-drill and end mill machining super high harness metals. |
TU08 | For PCB micro-drill,mini milling cutter. |
TU08S | For micro PCB drill, cutting tools for finis machining quenched materials(HRC60-65),316L stainless steel, high polishing metal sheet and silicon steel sheet of motor. |
TU40 | For common drill bit, end mill and punching die. |
TU40F | For common drill bit, end mill machining titanium alloy, stainless steel and gray cast iron. |
TU40S | For cutting tools machining 316L stainless steel, best material for common circular cuctters. |
TU44 | For cutting tools machining titanium alloy, heat resistant alloy, stainless steel, quesnched steel(HRC55 and above),gray cast iron. |
TU25 | For cutting tools machining heat treated steel(Hardness HRC45 and above),cast iron, stainless steel. |
TU45 | For cutting tools machining titanium, heat resistant alloy, stainless steel, quesnched steel(HRC60 and above) |
TU55 | Grade with high red-hardness, good for cutting tools machining high temperature resistant alloy, quenched steel(HRC60 and above) and titanium alloy |
Specification of Solid Carbide Rods
Dia. Ø
mm |
Tolerance.(mm) | Length(mm) | Tol.(mm) | Dia.Ø(mm) | Tolerance.(mm) | Length(mm) | Tol.(mm) |
2.0 | +0.30/+0.15 | 330 | 1.5 | 16.5 | +0.8/+0.3 | 330 | 1.5 |
2.5 | +0.30/+0.15 | 330 | 1.5 | 17.0 | +0.8/+0.3 | 330 | 1.5 |
3.0 | +0.50/+0.30 | 330 | 1.5 | 17.5 | +0.8/+0.3 | 330 | 1.5 |
3.5 | +0.50/+0.30 | 330 | 1.5 | 18.0 | +0.8/+0.3 | 330 | 1.5 |
4.0 | +0.50/+0.30 | 330 | 1.5 | 18.5 | +0.8/+0.3 | 330 | 1.5 |
4.5 | +0.50/+0.30 | 330 | 1.5 | 19.0 | +0.8/+0.3 | 330 | 1.5 |
5.0 | +0.50/+0.30 | 330 | 1.5 | 19.5 | +0.8/+0.3 | 330 | 1.5 |
5.5 | +0.50/+0.30 | 330 | 1.5 | 20.0 | +0.8/+0.3 | 330 | 1.5 |
6.0 | +0.50/+0.30 | 330 | 1.5 | 20.5 | +0.8/+0.3 | 330 | 1.5 |
6.5 | +0.50/+0.30 | 330 | 1.5 | 21.0 | +0.8/+0.3 | 330 | 1.5 |
7.0 | +0.50/+0.30 | 330 | 1.5 | 21.5 | +0.8/+0.3 | 330 | 1.5 |
7.5 | +0.50/+0.30 | 330 | 1.5 | 22.0 | +0.8/+0.3 | 330 | 1.5 |
8.0 | +0.50/+0.30 | 330 | 1.5 | 22.5 | +0.8/+0.3 | 330 | 1.5 |
8.5 | +0.50/+0.30 | 330 | 1.5 | 23.0 | +0.8/+0.3 | 330 | 1.5 |
9.0 | +0.60/+0.30 | 330 | 1.5 | 23.5 | +0.8/+0.3 | 330 | 1.5 |
9.5 | +0.60/+0.30 | 330 | 1.5 | 24.0 | +0.8/+0.3 | 330 | 1.5 |
10.0 | +0.60/+0.30 | 330 | 1.5 | 24.5 | +0.8/+0.3 | 330 | 1.5 |
10.5 | +0.60/+0.30 | 330 | 1.5 | 25.0 | +0.8/+0.3 | 330 | 1.5 |
11.0 | +0.60/+0.30 | 330 | 1.5 | 25.5 | +0.8/+0.3 | 330 | 1.5 |
11.5 | +0.60/+0.30 | 330 | 1.5 | 26.0 | +0.8/+0.3 | 330 | 1.5 |
12.0 | +0.60/+0.30 | 330 | 1.5 | 26.5 | +0.8/+0.3 | 330 | 1.5 |
12.5 | +0.60/+0.30 | 330 | 1.5 | 27.0 | +0.8/+0.3 | 330 | 1.5 |
13.0 | +0.60/+0.30 | 330 | 1.5 | 27.5 | +0.8/+0.3 | 330 | 1.5 |
13.5 | +0.60/+0.30 | 330 | 1.5 | 28.0 | +0.8/+0.3 | 330 | 1.5 |
14.0 | +0.70/+0.30 | 330 | 1.5 | 28.5 | +0.8/+0.3 | 330 | 1.5 |
14.5 | +0.70/+0.30 | 330 | 1.5 | 29.0 | +0.8/+0.3 | 330 | 1.5 |
Product detail pictures:
Related Product Guide:
Gaining purchaser gratification is our company's aim eternally. We're going to make great initiatives to create new and top-quality products, satisfy your exclusive prerequisites and supply you with pre-sale, on-sale and after-sale solutions for Hot sale Cemented Carbide Preform - Solid Carbide Rods – Toonney, The product will supply to all over the world, such as: Brasilia, Ghana, Bangladesh, To let customers be more confident in us and get the most comfortable service, we run our company with honesty, sincerity and best quality . We firmly believe that it is our pleasure to help customers to run their business more successfully, and that our professional advice and service can lead to more suitable choice for the customers.
By Honorio from South Korea - 2017.06.19 13:51
The factory can meet continuously developing economic and market needs, so that their products are widely recognized and trusted, and that's why we chose this company.
By Agustin from Roman - 2018.09.23 17:37