Factory wholesale Tungsten Carbide Rod H6 - Carbide Rod With Coolant Hole – Toonney
Factory wholesale Tungsten Carbide Rod H6 - Carbide Rod With Coolant Hole – Toonney Detail:
Carbide Rods with One Coolant Duct
This blank is specially for some CNC blades or drills which needs duct for coolant to cool the increased heat during the high speed cutting or drilling. Standard specification and tolerance table please reference below.
Outer D(mm) | OD Tol.(mm) | Inner Hole d(mm) | ID Tol.(mm) | Hole center diviation value α | Length(mm) | L Tol.(mm) |
3.0 | +0.50/+0.30 | 0.5 | ±0.10 | 0.10 | 330 | +1.5 |
4.0 | +0.50/+0.30 | 0.8 | ±0.10 | 0.10 | 330 | +1.5 |
5.0 | +0.50/+0.30 | 0.8 | ±0.10 | 0.13 | 330 | +1.5 |
6.0 | +0.50/+0.30 | 1.0 | ±0.15 | 0.15 | 330 | +1.5 |
7.0 | +0.60/+0.30 | 1.0 | ±0.15 | 0.15 | 330 | +1.5 |
8.0 | +0.60/+0.30 | 1.0 | ±0.15 | 0.15 | 330 | +1.5 |
9.0 | +0.60/+0.30 | 1.4 | ±0.15 | 0.20 | 330 | +1.5 |
10.0 | +0.60/+0.30 | 1.4 | ±0.15 | 0.20 | 330 | +1.5 |
11.0 | +0.60/+0.30 | 1.4 | ±0.15 | 0.28 | 330 | +1.5 |
12.0 | +0.60/+0.30 | 1.8 | ±0.15 | 0.30 | 330 | +1.5 |
13.0 | +0.70/+0.30 | 1.8 | ±0.15 | 0.34 | 330 | +1.5 |
14.0 | +0.70/+0.30 | 1.8 | ±0.15 | 0.37 | 330 | +1.5 |
15.0 | +0.70/+0.30 | 2.0 | ±0.20 | 0.40 | 330 | +1.5 |
16.0 | +0.70/+0.30 | 2.0 | ±0.20 | 0.40 | 330 | +1.5 |
17.0 | +0.80/+0.30 | 2.0 | ±0.20 | 0.47 | 330 | +1.5 |
18.0 | +0.80/+0.30 | 2.0 | ±0.20 | 0.50 | 330 | +1.5 |
19.0 | +0.80/+0.30 | 2.0 | ±0.20 | 0.50 | 330 | +1.5 |
20.0 | +0.80/+0.30 | 2.5 | ±0.25 | 0.50 | 330 | +1.5 |
21.0 | +0.80/+0.30 | 2.5 | ±0.25 | 0.50 | 330 | +1.5 |
22.0 | +0.80/+0.30 | 2.5 | ±0.25 | 0.50 | 330 | +1.5 |
23.0 | +0.80/+0.30 | 3.0 | ±0.25 | 0.50 | 330 | +1.5 |
24.0 | +0.80/+0.30 | 3.0 | ±0.25 | 0.50 | 330 | +1.5 |
25.0 | +0.80/+0.30 | 3.0 | ±0.25 | 0.50 | 330 | +1.5 |
26.0 | +0.80/+0.30 | 3.0 | ±0.25 | 0.50 | 330 | +1.5 |
27.0 | +0.80/+0.30 | 3.0 | ±0.25 | 0.50 | 330 | +1.5 |
28.0 | +0.80/+0.30 | 3.0 | ±0.25 | 0.50 | 330 | +1.5 |
29.0 | +0.80/+0.30 | 3.0 | ±0.25 | 0.50 | 330 | +1.5 |
30.0 | +0.80/+0.30 | 3.0 | ±0.25 | 0.50 | 330 | +1.5 |
Carbide Rod with Two Straight Holes
This blank is especially for some CNC blades or drills which needs duct for coolant to cool the increased heat during the high-speed cutting or drilling. Standard specification and tolerance table please reference below.
Standard pitch
Outside Dia. Ø(mm) | OD Tol. (mm) | Inner d(mm) | ID Tol.(mm) | Distance between holds | Hole center diviation value α | L mm | Tol. (mm) | |
mm | Tol. (mm) | |||||||
6.0 | +0.50/+0.30 | 0.8 | ±0.10 | 1.5 | ﹢0/-0.20 | 0.15 | 330 | +1.5 |
7.0 | +0.60/+0.30 | 0.8 | ±0.10 | 1.5 | ﹢0/-0.20 | 0.15 | 330 | +1.5 |
8.0 | +0.60/+0.30 | 1.0 | ±0.15 | 1.5 | ﹢0/-0.30 | 0.15 | 330 | +1.5 |
9.0 | +0.60/+0.30 | 1.0 | ±0.15 | 2.6 | ﹢0/-0.30 | 0.20 | 330 | +1.5 |
10.0 | +0.60/+0.30 | 1.0 | ±0.15 | 2.6 | ﹢0/-0.30 | 0.20 | 330 | +1.5 |
11.0 | +0.60/+0.30 | 1.2 | ±0.15 | 3.6 | ﹢0/-0.30 | 0.28 | 330 | +1.5 |
12.0 | +0.60/+0.30 | 1.2 | ±0.15 | 3.6 | ﹢0/-0.30 | 0.30 | 330 | +1.5 |
13.0 | +0.70/+0.30 | 1.2 | ±0.15 | 3.6 | ﹢0/-0.30 | 0.34 | 330 | +1.5 |
14.0 | +0.70/+0.30 | 1.5 | ±0.15 | 5.0 | ﹢0/-0.30 | 0.37 | 330 | +1.5 |
15.0 | +0.70/+0.30 | 1.5 | ±0.15 | 5.0 | ﹢0/-0.30 | 0.40 | 330 | +1.5 |
16.0 | +0.70/+0.30 | 1.5 | ±0.15 | 5.0 | ﹢0/-0.30 | 0.40 | 330 | +1.5 |
17.0 | +0.80/+0.30 | 2.0 | ±0.20 | 6.2 | ﹢0/-0.30 | 0.47 | 330 | +1.5 |
18.0 | +0.80/+0.30 | 2.0 | ±0.20 | 6.2 | ﹢0/-0.30 | 0.50 | 330 | +1.5 |
19.0 | +0.80/+0.30 | 2.0 | ±0.20 | 6.2 | ﹢0/-0.30 | 0.50 | 330 | +1.5 |
20.0 | +0.80/+0.30 | 2.0 | ±0.20 | 6.2 | ﹢0/-0.40 | 0.50 | 330 | +1.5 |
21.0 | +0.80/+0.30 | 2.0 | ±0.20 | 6.2 | ﹢0/-0.40 | 0.50 | 330 | +1.5 |
22.0 | +0.80/+0.30 | 2.0 | ±0.20 | 6.2 | ﹢0/-0.40 | 0.50 | 330 | +1.5 |
23.0 | +0.80/+0.30 | 2.0 | ±0.20 | 7.5 | ﹢0/-0.40 | 0.50 | 330 | +1.5 |
24.0 | +0.80/+0.30 | 2.0 | ±0.20 | 7.5 | ﹢0/-0.50 | 0.50 | 330 | +1.5 |
25.0 | +0.80/+0.30 | 2.0 | ±0.20 | 7.5 | ﹢0/-0.50 | 0.50 | 330 | +1.5 |
26.0 | +0.80/+0.30 | 2.0 | ±0.20 | 7.5 | ﹢0/-0.50 | 0.50 | 330 | +1.5 |
Carbide Rod with Two Helical Holes
Coolant hole in the type of helical shape is one new of our product series, below is the size detail.
D(mm) | D tol. | TK | Tk tol | hole | Hole tol. | Pitch | L+1.0 |
3.3 | +0.7 | 1.60 | ±0.10 | 0.40 | ±0.10 | 16.32 | 310/330 |
3.8 | +0.7 | 1.80 | ±0.10 | 0.50 | ±0.10 | 19.04 | 310/330 |
4.3 | +0.7 | 2.10 | ±0.10 | 0.60 | ±0.10 | 21.77 | 310/330 |
4.8 | +0.7 | 2.25 | ±0.15 | 0.70 | ±0.10 | 24.49 | 310/330 |
5.3 | +0.7 | 2.40 | ±0.20 | 0.70 | ±0.10 | 27.21 | 310/330 |
5.8 | +0.7 | 2.40 | ±0.20 | 0.70 | ±0.10 | 29.93 | 310/330 |
6.3 | +0.7 | 2.40 | ±0.20 | 0.70 | ±0.10 | 32.65 | 310/330 |
6.8 | +0.7 | 3.30 | ±0.20 | 1.00 | ±0.15 | 35.37 | 310/330 |
7.3 | +0.7 | 3.50 | ±0.20 | 1.00 | ±0.15 | 38.09 | 310/330 |
7.8 | +0.7 | 3.80 | ±0.20 | 1.00 | ±0.15 | 40.81 | 310/330 |
8.3 | +0.7 | 3.80 | ±0.20 | 1.00 | ±0.15 | 43.53 | 310/330 |
8.8 | +0.7 | 4.20 | ±0.30 | 1.00 | ±0.15 | 46.25 | 310/330 |
9.3 | +0.7 | 4.50 | ±0.30 | 1.40 | ±0.15 | 48.97 | 310/330 |
9.8 | +0.7 | 4.50 | ±0.30 | 1.40 | ±0.15 | 51.69 | 310/330 |
10.3 | +0.7 | 4.50 | ±0.30 | 1.40 | ±0.15 | 54.41 | 310/330 |
10.8 | +0.7 | 4.50 | ±0.30 | 1.40 | ±0.15 | 57.13 | 310/330 |
11.3 | +0.7 | 4.90 | ±0.40 | 1.40 | ±0.15 | 59.86 | 310/330 |
11.8 | +0.7 | 5.40 | ±0.40 | 1.40 | ±0.15 | 62.58 | 310/330 |
12.3 | +0.7 | 5.85 | ±0.40 | 1.40 | ±0.15 | 65.3 | 310/330 |
12.8 | +0.7 | 5.85 | ±0.40 | 1.75 | ±0.20 | 68.02 | 310/330 |
13.3 | +0.8 | 6.10 | ±0.40 | 1.75 | ±0.20 | 70.74 | 310/330 |
13.8 | +0.8 | 6.40 | ±0.40 | 1.75 | ±0.20 | 73.46 | 310/330 |
14.3 | +0.8 | 6.70 | ±0.40 | 1.75 | ±0.20 | 76.18 | 310/330 |
14.8 | +0.8 | 7.00 | ±0.40 | 1.75 | ±0.20 | 78.9 | 310/330 |
15.3 | +0.8 | 7.30 | ±0.40 | 1.75 | ±0.20 | 81.62 | 310/330 |
15.8 | +0.8 | 7.60 | ±0.40 | 1.75 | ±0.20 | 84.34 | 310/330 |
16.3 | +0.8 | 7.90 | ±0.40 | 1.75 | ±0.20 | 87.06 | 310/330 |
16.8 | +0.8 | 8.20 | ±0.40 | 1.75 | ±0.20 | 89.78 | 310/330 |
17.3 | +0.8 | 8.50 | ±0.40 | 1.75 | ±0.20 | 92.5 | 310/330 |
17.8 | +0.8 | 8.80 | ±0.40 | 1.75 | ±0.20 | 95.22 | 310/330 |
18.8 | +0.8 | 9.35 | ±0.40 | 2.00 | ±0.25 | 100.67 | 310/330 |
19.3 | +0.8 | 9.70 | ±0.40 | 2.00 | ±0.25 | 103.39 | 310/330 |
19.8 | +0.8 | 9.75 | ±0.50 | 2.00 | ±0.25 | 106.11 | 310/330 |
20.3 | +0.8 | 9.90 | ±0.50 | 2.00 | ±0.25 | 108.83 | 310/330 |
Carbide Rod with Three Helical Holes
Some special precise end mills or drills needs 3 helical holes to get better cutting performs, we specially develop carbide rod blanks for this application. Specifications detail as below:
Outer D (mm) |
OD Tol. (mm) |
TK (mm) |
Distance Tol. (mm) |
Inner Dia. (mm) |
ID (mm) |
Pitch (mm) |
Pitch Tol. (mm) |
|
6 | ﹢1.0/﹢0.6 | 2.75 | -0.4 | 0.7 | ±0.10 | 32.7 | -0.7 | 0.62 |
8 | ﹢1.4/﹢0.7 | 3 | -0.4 | 1 | ±0.15 | 43.53 | -0.86 | 0.89 |
10 | ﹢1.4/﹢0.7 | 5 | -0.6 | 1.4 | ±0.15 | 54.41 | -1.08 | 1.12 |
12 | ﹢1.4/﹢0.7 | 6 | -0.6 | 1.4 | ±0.15 | 65.3 | -1.3 | 1.33 |
14 | ﹢1.5/﹢0.7 | 7 | -0.8 | 1.75 | ±0.20 | 76.18 | -1.51 | 1.56 |
16 | ﹢1.6/﹢0.7 | 8 | -0.8 | 1.75 | ±0.20 | 87.06 | -1.73 | 1.78 |
18 | ﹢1.7/﹢0.7 | 9.55 | -0.8 | 2 | ±0.25 | 97.95 | -1.95 | 2.00 |
20 | ﹢1.7/﹢0.7 | 10 | -1 | 2 | ±0.25 | 108.83 | -2.16 | 2.22 |
Length: 330+0/+1.5mm |
Product detail pictures:
Related Product Guide:
With dependable high-quality method, fantastic standing and ideal purchaser assistance, the series of products produced by our firm are exported to many countries and regions for Factory wholesale Tungsten Carbide Rod H6 - Carbide Rod With Coolant Hole – Toonney, The product will supply to all over the world, such as: New Orleans, Johannesburg, Cairo, Our staffs are rich in experience and trained strictly, with qualified knowledge, with energy and always respect their customers as the No. 1, and promise to do their best to deliver the effective and individual service for customers. The Company pays attention to maintaining and developing the long-term cooperation relationship with the customers. We promise, as your ideal partner, we'll develop a bright future and enjoy the satisfying fruit together with you, with persisting zeal, endless energy and forward spirit.
By Frank from UAE - 2018.09.16 11:31
Superb technology, perfect after-sales service and efficient work efficiency, we think this is our best choice.
By Lydia from Jordan - 2018.09.12 17:18