• sns01
  • sns02
  • sns03
English

Factory wholesale Cemented Carbide T Preform For Cutting Tools – Carbide Rod With Coolant Hole – Toonney

Factory wholesale Cemented Carbide T Preform For Cutting Tools – Carbide Rod With Coolant Hole – Toonney Featured Image
  • Factory wholesale Cemented Carbide T Preform For Cutting Tools – Carbide Rod With Coolant Hole – Toonney

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

To regularly increase the management program by virtue from the rule of "sincerely, good religion and high quality are the base of enterprise development", we greatly absorb the essence of linked products internationally, and constantly produce new goods to satisfy the calls for of shoppers for Tungsten Carbide Rod Blank, Tungsten Carbide Nut Hole Gun Drill, Screw Die Core, For further queries or should you have any question regarding our products, please do not hesitate to contact us.
Factory wholesale Cemented Carbide T Preform For Cutting Tools – Carbide Rod With Coolant Hole – Toonney Detail:

iconCarbide Rods with One Coolant Duct

This blank is specially for some CNC blades or drills which needs duct for coolant to cool the increased heat during the high speed cutting or drilling. Standard specification and tolerance table please reference below.

Outer D(mm) OD Tol.(mm) Inner Hole d(mm) ID Tol.(mm) Hole center diviation value α Length（mm） L Tol.(mm)
3.0 +0.50/+0.30 0.5 ±0.10 0.10 330 +1.5
4.0 +0.50/+0.30 0.8 ±0.10 0.10 330 +1.5
5.0 +0.50/+0.30 0.8 ±0.10 0.13 330 +1.5
6.0 +0.50/+0.30 1.0 ±0.15 0.15 330 +1.5
7.0 +0.60/+0.30 1.0 ±0.15 0.15 330 +1.5
8.0 +0.60/+0.30 1.0 ±0.15 0.15 330 +1.5
9.0 +0.60/+0.30 1.4 ±0.15 0.20 330 +1.5
10.0 +0.60/+0.30 1.4 ±0.15 0.20 330 +1.5
11.0 +0.60/+0.30 1.4 ±0.15 0.28 330 +1.5
12.0 +0.60/+0.30 1.8 ±0.15 0.30 330 +1.5
13.0 +0.70/+0.30 1.8 ±0.15 0.34 330 +1.5
14.0 +0.70/+0.30 1.8 ±0.15 0.37 330 +1.5
15.0 +0.70/+0.30 2.0 ±0.20 0.40 330 +1.5
16.0 +0.70/+0.30 2.0 ±0.20 0.40 330 +1.5
17.0 +0.80/+0.30 2.0 ±0.20 0.47 330 +1.5
18.0 +0.80/+0.30 2.0 ±0.20 0.50 330 +1.5
19.0 +0.80/+0.30 2.0 ±0.20 0.50 330 +1.5
20.0 +0.80/+0.30 2.5 ±0.25 0.50 330 +1.5
21.0 +0.80/+0.30 2.5 ±0.25 0.50 330 +1.5
22.0 +0.80/+0.30 2.5 ±0.25 0.50 330 +1.5
23.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5
24.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5
25.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5
26.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5
27.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5
28.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5
29.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5
30.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5

iconCarbide Rod with Two Straight Holes

This blank is especially for some CNC blades or drills which needs duct for coolant to cool the increased heat during the high-speed cutting or drilling. Standard specification and tolerance table please reference below.

Standard pitch

Outside Dia. Ø(mm) OD Tol. (mm) Inner d(mm) ID Tol.(mm) Distance between holds Hole center diviation value α L mm Tol. (mm)
mm Tol. (mm)
6.0 +0.50/+0.30 0.8 ±0.10 1.5 ﹢0/-0.20 0.15 330 +1.5
7.0 +0.60/+0.30 0.8 ±0.10 1.5 ﹢0/-0.20 0.15 330 +1.5
8.0 +0.60/+0.30 1.0 ±0.15 1.5 ﹢0/-0.30 0.15 330 +1.5
9.0 +0.60/+0.30 1.0 ±0.15 2.6 ﹢0/-0.30 0.20 330 +1.5
10.0 +0.60/+0.30 1.0 ±0.15 2.6 ﹢0/-0.30 0.20 330 +1.5
11.0 +0.60/+0.30 1.2 ±0.15 3.6 ﹢0/-0.30 0.28 330 +1.5
12.0 +0.60/+0.30 1.2 ±0.15 3.6 ﹢0/-0.30 0.30 330 +1.5
13.0 +0.70/+0.30 1.2 ±0.15 3.6 ﹢0/-0.30 0.34 330 +1.5
14.0 +0.70/+0.30 1.5 ±0.15 5.0 ﹢0/-0.30 0.37 330 +1.5
15.0 +0.70/+0.30 1.5 ±0.15 5.0 ﹢0/-0.30 0.40 330 +1.5
16.0 +0.70/+0.30 1.5 ±0.15 5.0 ﹢0/-0.30 0.40 330 +1.5
17.0 +0.80/+0.30 2.0 ±0.20 6.2 ﹢0/-0.30 0.47 330 +1.5
18.0 +0.80/+0.30 2.0 ±0.20 6.2 ﹢0/-0.30 0.50 330 +1.5
19.0 +0.80/+0.30 2.0 ±0.20 6.2 ﹢0/-0.30 0.50 330 +1.5
20.0 +0.80/+0.30 2.0 ±0.20 6.2 ﹢0/-0.40 0.50 330 +1.5
21.0 +0.80/+0.30 2.0 ±0.20 6.2 ﹢0/-0.40 0.50 330 +1.5
22.0 +0.80/+0.30 2.0 ±0.20 6.2 ﹢0/-0.40 0.50 330 +1.5
23.0 +0.80/+0.30 2.0 ±0.20 7.5 ﹢0/-0.40 0.50 330 +1.5
24.0 +0.80/+0.30 2.0 ±0.20 7.5 ﹢0/-0.50 0.50 330 +1.5
25.0 +0.80/+0.30 2.0 ±0.20 7.5 ﹢0/-0.50 0.50 330 +1.5
26.0 +0.80/+0.30 2.0 ±0.20 7.5 ﹢0/-0.50 0.50 330 +1.5

iconCarbide Rod with Two Helical Holes

Coolant hole in the type of helical shape is one new of our product series, below is the size detail.

carbide-rod-with-three-helical-holes

D(mm) D tol. TK Tk tol hole Hole tol. Pitch L+1.0
3.3 +0.7 1.60 ±0.10 0.40 ±0.10 16.32 310/330
3.8 +0.7 1.80 ±0.10 0.50 ±0.10 19.04 310/330
4.3 +0.7 2.10 ±0.10 0.60 ±0.10 21.77 310/330
4.8 +0.7 2.25 ±0.15 0.70 ±0.10 24.49 310/330
5.3 +0.7 2.40 ±0.20 0.70 ±0.10 27.21 310/330
5.8 +0.7 2.40 ±0.20 0.70 ±0.10 29.93 310/330
6.3 +0.7 2.40 ±0.20 0.70 ±0.10 32.65 310/330
6.8 +0.7 3.30 ±0.20 1.00 ±0.15 35.37 310/330
7.3 +0.7 3.50 ±0.20 1.00 ±0.15 38.09 310/330
7.8 +0.7 3.80 ±0.20 1.00 ±0.15 40.81 310/330
8.3 +0.7 3.80 ±0.20 1.00 ±0.15 43.53 310/330
8.8 +0.7 4.20 ±0.30 1.00 ±0.15 46.25 310/330
9.3 +0.7 4.50 ±0.30 1.40 ±0.15 48.97 310/330
9.8 +0.7 4.50 ±0.30 1.40 ±0.15 51.69 310/330
10.3 +0.7 4.50 ±0.30 1.40 ±0.15 54.41 310/330
10.8 +0.7 4.50 ±0.30 1.40 ±0.15 57.13 310/330
11.3 +0.7 4.90 ±0.40 1.40 ±0.15 59.86 310/330
11.8 +0.7 5.40 ±0.40 1.40 ±0.15 62.58 310/330
12.3 +0.7 5.85 ±0.40 1.40 ±0.15 65.3 310/330
12.8 +0.7 5.85 ±0.40 1.75 ±0.20 68.02 310/330
13.3 +0.8 6.10 ±0.40 1.75 ±0.20 70.74 310/330
13.8 +0.8 6.40 ±0.40 1.75 ±0.20 73.46 310/330
14.3 +0.8 6.70 ±0.40 1.75 ±0.20 76.18 310/330
14.8 +0.8 7.00 ±0.40 1.75 ±0.20 78.9 310/330
15.3 +0.8 7.30 ±0.40 1.75 ±0.20 81.62 310/330
15.8 +0.8 7.60 ±0.40 1.75 ±0.20 84.34 310/330
16.3 +0.8 7.90 ±0.40 1.75 ±0.20 87.06 310/330
16.8 +0.8 8.20 ±0.40 1.75 ±0.20 89.78 310/330
17.3 +0.8 8.50 ±0.40 1.75 ±0.20 92.5 310/330
17.8 +0.8 8.80 ±0.40 1.75 ±0.20 95.22 310/330
18.8 +0.8 9.35 ±0.40 2.00 ±0.25 100.67 310/330
19.3 +0.8 9.70 ±0.40 2.00 ±0.25 103.39 310/330
19.8 +0.8 9.75 ±0.50 2.00 ±0.25 106.11 310/330
20.3 +0.8 9.90 ±0.50 2.00 ±0.25 108.83 310/330

iconCarbide Rod with Three Helical Holes

Some special precise end mills or drills needs 3 helical holes to get better cutting performs, we specially develop carbide rod blanks for this application. Specifications detail as below:
carbide-rod-with-three-helical-holes

Outer D
(mm)		 OD Tol.
(mm)		 TK
(mm)		 Distance Tol.
(mm)		 Inner Dia.
(mm)		 ID
(mm)		 Pitch
(mm)		 Pitch Tol.
(mm)
6 ﹢1.0/﹢0.6 2.75 -0.4 0.7 ±0.10 32.7 -0.7 0.62
8 ﹢1.4/﹢0.7 3 -0.4 1 ±0.15 43.53 -0.86 0.89
10 ﹢1.4/﹢0.7 5 -0.6 1.4 ±0.15 54.41 -1.08 1.12
12 ﹢1.4/﹢0.7 6 -0.6 1.4 ±0.15 65.3 -1.3 1.33
14 ﹢1.5/﹢0.7 7 -0.8 1.75 ±0.20 76.18 -1.51 1.56
16 ﹢1.6/﹢0.7 8 -0.8 1.75 ±0.20 87.06 -1.73 1.78
18 ﹢1.7/﹢0.7 9.55 -0.8 2 ±0.25 97.95 -1.95 2.00
20 ﹢1.7/﹢0.7 10 -1 2 ±0.25 108.83 -2.16 2.22
Length: 330+0/+1.5mm
Product detail pictures:

Factory wholesale Cemented Carbide T Preform For Cutting Tools – Carbide Rod With Coolant Hole – Toonney detail pictures

Related Product Guide:
abide by the contract", conforms to the market requirement, joins during the market competition by its superior quality also as provides extra comprehensive and exceptional service for consumers to let them turn into significant winner. The pursue of the business, is definitely the clients' gratification for Factory wholesale Cemented Carbide T Preform For Cutting Tools – Carbide Rod With Coolant Hole – Toonney, The product will supply to all over the world, such as: Zimbabwe, Tanzania, Ethiopia, Our company follows laws and international practice. We promise to be responsible for friends, customers and all partners. We would like to establish a long-term relationship and friendship with every customer from all over the world on the basis of mutual benefits. We warmly welcome all old and new customers to visit our company to negotiate business.
    • This is a reputable company, they have a high level of business management, good quality product and service, every cooperation is assured and delighted!
    5 Stars By Meredith from Danish - 2018.12.22 12:52
    In general, we are satisfied with all aspects, cheap, high-quality, fast delivery and good procuct style, we will have follow-up cooperation!
    5 Stars By Samantha from Lithuania - 2017.03.28 12:22

    Related Products

    2021 Good Quality Sip Sintering Furnace With Dewaxing System - Sintering HIP Furnace – Toonney

    2021 Good Quality Sip Sintering Furnace With De...

    China Supplier Tungsten Carbide Rod With Chamfer - Solid Carbide Rods – Toonney

    China Supplier Tungsten Carbide Rod With Chamfe...

    Chinese Professional Vacuum Sintering Furnace For Cemented Carbide - Sintering HIP Furnace – Toonney

    Chinese Professional Vacuum Sintering Furnace F...

    PriceList for Tungsten Carbide T Preform - Carbide Rods – Toonney

    PriceList for Tungsten Carbide T Preform - Car...

    Fixed Competitive Price Sintering Furnace For Powder Metallurgy - Sintering HIP Furnace – Toonney

    Fixed Competitive Price Sintering Furnace For P...

    8 Year Exporter Vacuum Drying Furnace - Sintering HIP Furnace – Toonney

    8 Year Exporter Vacuum Drying Furnace - Sinter...