Factory wholesale Carbide T Preform - Carbide Rod With Coolant Hole – Toonney
Factory wholesale Carbide T Preform - Carbide Rod With Coolant Hole – Toonney Detail:
Carbide Rods with One Coolant Duct
This blank is specially for some CNC blades or drills which needs duct for coolant to cool the increased heat during the high speed cutting or drilling. Standard specification and tolerance table please reference below.
Outer D(mm) | OD Tol.(mm) | Inner Hole d(mm) | ID Tol.(mm) | Hole center diviation value α | Length(mm) | L Tol.(mm) |
3.0 | +0.50/+0.30 | 0.5 | ±0.10 | 0.10 | 330 | +1.5 |
4.0 | +0.50/+0.30 | 0.8 | ±0.10 | 0.10 | 330 | +1.5 |
5.0 | +0.50/+0.30 | 0.8 | ±0.10 | 0.13 | 330 | +1.5 |
6.0 | +0.50/+0.30 | 1.0 | ±0.15 | 0.15 | 330 | +1.5 |
7.0 | +0.60/+0.30 | 1.0 | ±0.15 | 0.15 | 330 | +1.5 |
8.0 | +0.60/+0.30 | 1.0 | ±0.15 | 0.15 | 330 | +1.5 |
9.0 | +0.60/+0.30 | 1.4 | ±0.15 | 0.20 | 330 | +1.5 |
10.0 | +0.60/+0.30 | 1.4 | ±0.15 | 0.20 | 330 | +1.5 |
11.0 | +0.60/+0.30 | 1.4 | ±0.15 | 0.28 | 330 | +1.5 |
12.0 | +0.60/+0.30 | 1.8 | ±0.15 | 0.30 | 330 | +1.5 |
13.0 | +0.70/+0.30 | 1.8 | ±0.15 | 0.34 | 330 | +1.5 |
14.0 | +0.70/+0.30 | 1.8 | ±0.15 | 0.37 | 330 | +1.5 |
15.0 | +0.70/+0.30 | 2.0 | ±0.20 | 0.40 | 330 | +1.5 |
16.0 | +0.70/+0.30 | 2.0 | ±0.20 | 0.40 | 330 | +1.5 |
17.0 | +0.80/+0.30 | 2.0 | ±0.20 | 0.47 | 330 | +1.5 |
18.0 | +0.80/+0.30 | 2.0 | ±0.20 | 0.50 | 330 | +1.5 |
19.0 | +0.80/+0.30 | 2.0 | ±0.20 | 0.50 | 330 | +1.5 |
20.0 | +0.80/+0.30 | 2.5 | ±0.25 | 0.50 | 330 | +1.5 |
21.0 | +0.80/+0.30 | 2.5 | ±0.25 | 0.50 | 330 | +1.5 |
22.0 | +0.80/+0.30 | 2.5 | ±0.25 | 0.50 | 330 | +1.5 |
23.0 | +0.80/+0.30 | 3.0 | ±0.25 | 0.50 | 330 | +1.5 |
24.0 | +0.80/+0.30 | 3.0 | ±0.25 | 0.50 | 330 | +1.5 |
25.0 | +0.80/+0.30 | 3.0 | ±0.25 | 0.50 | 330 | +1.5 |
26.0 | +0.80/+0.30 | 3.0 | ±0.25 | 0.50 | 330 | +1.5 |
27.0 | +0.80/+0.30 | 3.0 | ±0.25 | 0.50 | 330 | +1.5 |
28.0 | +0.80/+0.30 | 3.0 | ±0.25 | 0.50 | 330 | +1.5 |
29.0 | +0.80/+0.30 | 3.0 | ±0.25 | 0.50 | 330 | +1.5 |
30.0 | +0.80/+0.30 | 3.0 | ±0.25 | 0.50 | 330 | +1.5 |
Carbide Rod with Two Straight Holes
This blank is especially for some CNC blades or drills which needs duct for coolant to cool the increased heat during the high-speed cutting or drilling. Standard specification and tolerance table please reference below.
Standard pitch
Outside Dia. Ø(mm) | OD Tol. (mm) | Inner d(mm) | ID Tol.(mm) | Distance between holds | Hole center diviation value α | L mm | Tol. (mm) | |
mm | Tol. (mm) | |||||||
6.0 | +0.50/+0.30 | 0.8 | ±0.10 | 1.5 | ﹢0/-0.20 | 0.15 | 330 | +1.5 |
7.0 | +0.60/+0.30 | 0.8 | ±0.10 | 1.5 | ﹢0/-0.20 | 0.15 | 330 | +1.5 |
8.0 | +0.60/+0.30 | 1.0 | ±0.15 | 1.5 | ﹢0/-0.30 | 0.15 | 330 | +1.5 |
9.0 | +0.60/+0.30 | 1.0 | ±0.15 | 2.6 | ﹢0/-0.30 | 0.20 | 330 | +1.5 |
10.0 | +0.60/+0.30 | 1.0 | ±0.15 | 2.6 | ﹢0/-0.30 | 0.20 | 330 | +1.5 |
11.0 | +0.60/+0.30 | 1.2 | ±0.15 | 3.6 | ﹢0/-0.30 | 0.28 | 330 | +1.5 |
12.0 | +0.60/+0.30 | 1.2 | ±0.15 | 3.6 | ﹢0/-0.30 | 0.30 | 330 | +1.5 |
13.0 | +0.70/+0.30 | 1.2 | ±0.15 | 3.6 | ﹢0/-0.30 | 0.34 | 330 | +1.5 |
14.0 | +0.70/+0.30 | 1.5 | ±0.15 | 5.0 | ﹢0/-0.30 | 0.37 | 330 | +1.5 |
15.0 | +0.70/+0.30 | 1.5 | ±0.15 | 5.0 | ﹢0/-0.30 | 0.40 | 330 | +1.5 |
16.0 | +0.70/+0.30 | 1.5 | ±0.15 | 5.0 | ﹢0/-0.30 | 0.40 | 330 | +1.5 |
17.0 | +0.80/+0.30 | 2.0 | ±0.20 | 6.2 | ﹢0/-0.30 | 0.47 | 330 | +1.5 |
18.0 | +0.80/+0.30 | 2.0 | ±0.20 | 6.2 | ﹢0/-0.30 | 0.50 | 330 | +1.5 |
19.0 | +0.80/+0.30 | 2.0 | ±0.20 | 6.2 | ﹢0/-0.30 | 0.50 | 330 | +1.5 |
20.0 | +0.80/+0.30 | 2.0 | ±0.20 | 6.2 | ﹢0/-0.40 | 0.50 | 330 | +1.5 |
21.0 | +0.80/+0.30 | 2.0 | ±0.20 | 6.2 | ﹢0/-0.40 | 0.50 | 330 | +1.5 |
22.0 | +0.80/+0.30 | 2.0 | ±0.20 | 6.2 | ﹢0/-0.40 | 0.50 | 330 | +1.5 |
23.0 | +0.80/+0.30 | 2.0 | ±0.20 | 7.5 | ﹢0/-0.40 | 0.50 | 330 | +1.5 |
24.0 | +0.80/+0.30 | 2.0 | ±0.20 | 7.5 | ﹢0/-0.50 | 0.50 | 330 | +1.5 |
25.0 | +0.80/+0.30 | 2.0 | ±0.20 | 7.5 | ﹢0/-0.50 | 0.50 | 330 | +1.5 |
26.0 | +0.80/+0.30 | 2.0 | ±0.20 | 7.5 | ﹢0/-0.50 | 0.50 | 330 | +1.5 |
Carbide Rod with Two Helical Holes
Coolant hole in the type of helical shape is one new of our product series, below is the size detail.
D(mm) | D tol. | TK | Tk tol | hole | Hole tol. | Pitch | L+1.0 |
3.3 | +0.7 | 1.60 | ±0.10 | 0.40 | ±0.10 | 16.32 | 310/330 |
3.8 | +0.7 | 1.80 | ±0.10 | 0.50 | ±0.10 | 19.04 | 310/330 |
4.3 | +0.7 | 2.10 | ±0.10 | 0.60 | ±0.10 | 21.77 | 310/330 |
4.8 | +0.7 | 2.25 | ±0.15 | 0.70 | ±0.10 | 24.49 | 310/330 |
5.3 | +0.7 | 2.40 | ±0.20 | 0.70 | ±0.10 | 27.21 | 310/330 |
5.8 | +0.7 | 2.40 | ±0.20 | 0.70 | ±0.10 | 29.93 | 310/330 |
6.3 | +0.7 | 2.40 | ±0.20 | 0.70 | ±0.10 | 32.65 | 310/330 |
6.8 | +0.7 | 3.30 | ±0.20 | 1.00 | ±0.15 | 35.37 | 310/330 |
7.3 | +0.7 | 3.50 | ±0.20 | 1.00 | ±0.15 | 38.09 | 310/330 |
7.8 | +0.7 | 3.80 | ±0.20 | 1.00 | ±0.15 | 40.81 | 310/330 |
8.3 | +0.7 | 3.80 | ±0.20 | 1.00 | ±0.15 | 43.53 | 310/330 |
8.8 | +0.7 | 4.20 | ±0.30 | 1.00 | ±0.15 | 46.25 | 310/330 |
9.3 | +0.7 | 4.50 | ±0.30 | 1.40 | ±0.15 | 48.97 | 310/330 |
9.8 | +0.7 | 4.50 | ±0.30 | 1.40 | ±0.15 | 51.69 | 310/330 |
10.3 | +0.7 | 4.50 | ±0.30 | 1.40 | ±0.15 | 54.41 | 310/330 |
10.8 | +0.7 | 4.50 | ±0.30 | 1.40 | ±0.15 | 57.13 | 310/330 |
11.3 | +0.7 | 4.90 | ±0.40 | 1.40 | ±0.15 | 59.86 | 310/330 |
11.8 | +0.7 | 5.40 | ±0.40 | 1.40 | ±0.15 | 62.58 | 310/330 |
12.3 | +0.7 | 5.85 | ±0.40 | 1.40 | ±0.15 | 65.3 | 310/330 |
12.8 | +0.7 | 5.85 | ±0.40 | 1.75 | ±0.20 | 68.02 | 310/330 |
13.3 | +0.8 | 6.10 | ±0.40 | 1.75 | ±0.20 | 70.74 | 310/330 |
13.8 | +0.8 | 6.40 | ±0.40 | 1.75 | ±0.20 | 73.46 | 310/330 |
14.3 | +0.8 | 6.70 | ±0.40 | 1.75 | ±0.20 | 76.18 | 310/330 |
14.8 | +0.8 | 7.00 | ±0.40 | 1.75 | ±0.20 | 78.9 | 310/330 |
15.3 | +0.8 | 7.30 | ±0.40 | 1.75 | ±0.20 | 81.62 | 310/330 |
15.8 | +0.8 | 7.60 | ±0.40 | 1.75 | ±0.20 | 84.34 | 310/330 |
16.3 | +0.8 | 7.90 | ±0.40 | 1.75 | ±0.20 | 87.06 | 310/330 |
16.8 | +0.8 | 8.20 | ±0.40 | 1.75 | ±0.20 | 89.78 | 310/330 |
17.3 | +0.8 | 8.50 | ±0.40 | 1.75 | ±0.20 | 92.5 | 310/330 |
17.8 | +0.8 | 8.80 | ±0.40 | 1.75 | ±0.20 | 95.22 | 310/330 |
18.8 | +0.8 | 9.35 | ±0.40 | 2.00 | ±0.25 | 100.67 | 310/330 |
19.3 | +0.8 | 9.70 | ±0.40 | 2.00 | ±0.25 | 103.39 | 310/330 |
19.8 | +0.8 | 9.75 | ±0.50 | 2.00 | ±0.25 | 106.11 | 310/330 |
20.3 | +0.8 | 9.90 | ±0.50 | 2.00 | ±0.25 | 108.83 | 310/330 |
Carbide Rod with Three Helical Holes
Some special precise end mills or drills needs 3 helical holes to get better cutting performs, we specially develop carbide rod blanks for this application. Specifications detail as below:
Outer D (mm) |
OD Tol. (mm) |
TK (mm) |
Distance Tol. (mm) |
Inner Dia. (mm) |
ID (mm) |
Pitch (mm) |
Pitch Tol. (mm) |
|
6 | ﹢1.0/﹢0.6 | 2.75 | -0.4 | 0.7 | ±0.10 | 32.7 | -0.7 | 0.62 |
8 | ﹢1.4/﹢0.7 | 3 | -0.4 | 1 | ±0.15 | 43.53 | -0.86 | 0.89 |
10 | ﹢1.4/﹢0.7 | 5 | -0.6 | 1.4 | ±0.15 | 54.41 | -1.08 | 1.12 |
12 | ﹢1.4/﹢0.7 | 6 | -0.6 | 1.4 | ±0.15 | 65.3 | -1.3 | 1.33 |
14 | ﹢1.5/﹢0.7 | 7 | -0.8 | 1.75 | ±0.20 | 76.18 | -1.51 | 1.56 |
16 | ﹢1.6/﹢0.7 | 8 | -0.8 | 1.75 | ±0.20 | 87.06 | -1.73 | 1.78 |
18 | ﹢1.7/﹢0.7 | 9.55 | -0.8 | 2 | ±0.25 | 97.95 | -1.95 | 2.00 |
20 | ﹢1.7/﹢0.7 | 10 | -1 | 2 | ±0.25 | 108.83 | -2.16 | 2.22 |
Length: 330+0/+1.5mm |
Product detail pictures:
Related Product Guide:
We stick to our enterprise spirit of "Quality, Efficiency, Innovation and Integrity". We aim to create more value for our customers with our rich resources, advanced machinery, experienced workers and excellent services for Factory wholesale Carbide T Preform - Carbide Rod With Coolant Hole – Toonney, The product will supply to all over the world, such as: Australia, Spain, Macedonia, Our products are exported worldwide. Our customers are always satisfied with our reliable quality, customer-oriented services and competitive prices. Our mission is "to continue to earn your loyalty by dedicating our efforts to the constant improvement of our items and services in order to ensure the satisfaction of our end-users, customers, employees, suppliers and the worldwide communities in which we cooperate".
By ROGER Rivkin from San Diego - 2017.06.16 18:23
The company has rich resources, advanced machinery, experienced workers and excellent services, hope you keep improving and perfecting your products and service, wish you better!
By Moira from Brisbane - 2018.06.09 12:42