Factory source Two Helix Holes Carbide Rod - Carbide Rod With Coolant Hole – Toonney
Factory source Two Helix Holes Carbide Rod - Carbide Rod With Coolant Hole – Toonney Detail:
Carbide Rods with One Coolant Duct
This blank is specially for some CNC blades or drills which needs duct for coolant to cool the increased heat during the high speed cutting or drilling. Standard specification and tolerance table please reference below.
Outer D(mm) | OD Tol.(mm) | Inner Hole d(mm) | ID Tol.(mm) | Hole center diviation value α | Length(mm) | L Tol.(mm) |
3.0 | +0.50/+0.30 | 0.5 | ±0.10 | 0.10 | 330 | +1.5 |
4.0 | +0.50/+0.30 | 0.8 | ±0.10 | 0.10 | 330 | +1.5 |
5.0 | +0.50/+0.30 | 0.8 | ±0.10 | 0.13 | 330 | +1.5 |
6.0 | +0.50/+0.30 | 1.0 | ±0.15 | 0.15 | 330 | +1.5 |
7.0 | +0.60/+0.30 | 1.0 | ±0.15 | 0.15 | 330 | +1.5 |
8.0 | +0.60/+0.30 | 1.0 | ±0.15 | 0.15 | 330 | +1.5 |
9.0 | +0.60/+0.30 | 1.4 | ±0.15 | 0.20 | 330 | +1.5 |
10.0 | +0.60/+0.30 | 1.4 | ±0.15 | 0.20 | 330 | +1.5 |
11.0 | +0.60/+0.30 | 1.4 | ±0.15 | 0.28 | 330 | +1.5 |
12.0 | +0.60/+0.30 | 1.8 | ±0.15 | 0.30 | 330 | +1.5 |
13.0 | +0.70/+0.30 | 1.8 | ±0.15 | 0.34 | 330 | +1.5 |
14.0 | +0.70/+0.30 | 1.8 | ±0.15 | 0.37 | 330 | +1.5 |
15.0 | +0.70/+0.30 | 2.0 | ±0.20 | 0.40 | 330 | +1.5 |
16.0 | +0.70/+0.30 | 2.0 | ±0.20 | 0.40 | 330 | +1.5 |
17.0 | +0.80/+0.30 | 2.0 | ±0.20 | 0.47 | 330 | +1.5 |
18.0 | +0.80/+0.30 | 2.0 | ±0.20 | 0.50 | 330 | +1.5 |
19.0 | +0.80/+0.30 | 2.0 | ±0.20 | 0.50 | 330 | +1.5 |
20.0 | +0.80/+0.30 | 2.5 | ±0.25 | 0.50 | 330 | +1.5 |
21.0 | +0.80/+0.30 | 2.5 | ±0.25 | 0.50 | 330 | +1.5 |
22.0 | +0.80/+0.30 | 2.5 | ±0.25 | 0.50 | 330 | +1.5 |
23.0 | +0.80/+0.30 | 3.0 | ±0.25 | 0.50 | 330 | +1.5 |
24.0 | +0.80/+0.30 | 3.0 | ±0.25 | 0.50 | 330 | +1.5 |
25.0 | +0.80/+0.30 | 3.0 | ±0.25 | 0.50 | 330 | +1.5 |
26.0 | +0.80/+0.30 | 3.0 | ±0.25 | 0.50 | 330 | +1.5 |
27.0 | +0.80/+0.30 | 3.0 | ±0.25 | 0.50 | 330 | +1.5 |
28.0 | +0.80/+0.30 | 3.0 | ±0.25 | 0.50 | 330 | +1.5 |
29.0 | +0.80/+0.30 | 3.0 | ±0.25 | 0.50 | 330 | +1.5 |
30.0 | +0.80/+0.30 | 3.0 | ±0.25 | 0.50 | 330 | +1.5 |
Carbide Rod with Two Straight Holes
This blank is especially for some CNC blades or drills which needs duct for coolant to cool the increased heat during the high-speed cutting or drilling. Standard specification and tolerance table please reference below.
Standard pitch
Outside Dia. Ø(mm) | OD Tol. (mm) | Inner d(mm) | ID Tol.(mm) | Distance between holds | Hole center diviation value α | L mm | Tol. (mm) | |
mm | Tol. (mm) | |||||||
6.0 | +0.50/+0.30 | 0.8 | ±0.10 | 1.5 | ﹢0/-0.20 | 0.15 | 330 | +1.5 |
7.0 | +0.60/+0.30 | 0.8 | ±0.10 | 1.5 | ﹢0/-0.20 | 0.15 | 330 | +1.5 |
8.0 | +0.60/+0.30 | 1.0 | ±0.15 | 1.5 | ﹢0/-0.30 | 0.15 | 330 | +1.5 |
9.0 | +0.60/+0.30 | 1.0 | ±0.15 | 2.6 | ﹢0/-0.30 | 0.20 | 330 | +1.5 |
10.0 | +0.60/+0.30 | 1.0 | ±0.15 | 2.6 | ﹢0/-0.30 | 0.20 | 330 | +1.5 |
11.0 | +0.60/+0.30 | 1.2 | ±0.15 | 3.6 | ﹢0/-0.30 | 0.28 | 330 | +1.5 |
12.0 | +0.60/+0.30 | 1.2 | ±0.15 | 3.6 | ﹢0/-0.30 | 0.30 | 330 | +1.5 |
13.0 | +0.70/+0.30 | 1.2 | ±0.15 | 3.6 | ﹢0/-0.30 | 0.34 | 330 | +1.5 |
14.0 | +0.70/+0.30 | 1.5 | ±0.15 | 5.0 | ﹢0/-0.30 | 0.37 | 330 | +1.5 |
15.0 | +0.70/+0.30 | 1.5 | ±0.15 | 5.0 | ﹢0/-0.30 | 0.40 | 330 | +1.5 |
16.0 | +0.70/+0.30 | 1.5 | ±0.15 | 5.0 | ﹢0/-0.30 | 0.40 | 330 | +1.5 |
17.0 | +0.80/+0.30 | 2.0 | ±0.20 | 6.2 | ﹢0/-0.30 | 0.47 | 330 | +1.5 |
18.0 | +0.80/+0.30 | 2.0 | ±0.20 | 6.2 | ﹢0/-0.30 | 0.50 | 330 | +1.5 |
19.0 | +0.80/+0.30 | 2.0 | ±0.20 | 6.2 | ﹢0/-0.30 | 0.50 | 330 | +1.5 |
20.0 | +0.80/+0.30 | 2.0 | ±0.20 | 6.2 | ﹢0/-0.40 | 0.50 | 330 | +1.5 |
21.0 | +0.80/+0.30 | 2.0 | ±0.20 | 6.2 | ﹢0/-0.40 | 0.50 | 330 | +1.5 |
22.0 | +0.80/+0.30 | 2.0 | ±0.20 | 6.2 | ﹢0/-0.40 | 0.50 | 330 | +1.5 |
23.0 | +0.80/+0.30 | 2.0 | ±0.20 | 7.5 | ﹢0/-0.40 | 0.50 | 330 | +1.5 |
24.0 | +0.80/+0.30 | 2.0 | ±0.20 | 7.5 | ﹢0/-0.50 | 0.50 | 330 | +1.5 |
25.0 | +0.80/+0.30 | 2.0 | ±0.20 | 7.5 | ﹢0/-0.50 | 0.50 | 330 | +1.5 |
26.0 | +0.80/+0.30 | 2.0 | ±0.20 | 7.5 | ﹢0/-0.50 | 0.50 | 330 | +1.5 |
Carbide Rod with Two Helical Holes
Coolant hole in the type of helical shape is one new of our product series, below is the size detail.
D(mm) | D tol. | TK | Tk tol | hole | Hole tol. | Pitch | L+1.0 |
3.3 | +0.7 | 1.60 | ±0.10 | 0.40 | ±0.10 | 16.32 | 310/330 |
3.8 | +0.7 | 1.80 | ±0.10 | 0.50 | ±0.10 | 19.04 | 310/330 |
4.3 | +0.7 | 2.10 | ±0.10 | 0.60 | ±0.10 | 21.77 | 310/330 |
4.8 | +0.7 | 2.25 | ±0.15 | 0.70 | ±0.10 | 24.49 | 310/330 |
5.3 | +0.7 | 2.40 | ±0.20 | 0.70 | ±0.10 | 27.21 | 310/330 |
5.8 | +0.7 | 2.40 | ±0.20 | 0.70 | ±0.10 | 29.93 | 310/330 |
6.3 | +0.7 | 2.40 | ±0.20 | 0.70 | ±0.10 | 32.65 | 310/330 |
6.8 | +0.7 | 3.30 | ±0.20 | 1.00 | ±0.15 | 35.37 | 310/330 |
7.3 | +0.7 | 3.50 | ±0.20 | 1.00 | ±0.15 | 38.09 | 310/330 |
7.8 | +0.7 | 3.80 | ±0.20 | 1.00 | ±0.15 | 40.81 | 310/330 |
8.3 | +0.7 | 3.80 | ±0.20 | 1.00 | ±0.15 | 43.53 | 310/330 |
8.8 | +0.7 | 4.20 | ±0.30 | 1.00 | ±0.15 | 46.25 | 310/330 |
9.3 | +0.7 | 4.50 | ±0.30 | 1.40 | ±0.15 | 48.97 | 310/330 |
9.8 | +0.7 | 4.50 | ±0.30 | 1.40 | ±0.15 | 51.69 | 310/330 |
10.3 | +0.7 | 4.50 | ±0.30 | 1.40 | ±0.15 | 54.41 | 310/330 |
10.8 | +0.7 | 4.50 | ±0.30 | 1.40 | ±0.15 | 57.13 | 310/330 |
11.3 | +0.7 | 4.90 | ±0.40 | 1.40 | ±0.15 | 59.86 | 310/330 |
11.8 | +0.7 | 5.40 | ±0.40 | 1.40 | ±0.15 | 62.58 | 310/330 |
12.3 | +0.7 | 5.85 | ±0.40 | 1.40 | ±0.15 | 65.3 | 310/330 |
12.8 | +0.7 | 5.85 | ±0.40 | 1.75 | ±0.20 | 68.02 | 310/330 |
13.3 | +0.8 | 6.10 | ±0.40 | 1.75 | ±0.20 | 70.74 | 310/330 |
13.8 | +0.8 | 6.40 | ±0.40 | 1.75 | ±0.20 | 73.46 | 310/330 |
14.3 | +0.8 | 6.70 | ±0.40 | 1.75 | ±0.20 | 76.18 | 310/330 |
14.8 | +0.8 | 7.00 | ±0.40 | 1.75 | ±0.20 | 78.9 | 310/330 |
15.3 | +0.8 | 7.30 | ±0.40 | 1.75 | ±0.20 | 81.62 | 310/330 |
15.8 | +0.8 | 7.60 | ±0.40 | 1.75 | ±0.20 | 84.34 | 310/330 |
16.3 | +0.8 | 7.90 | ±0.40 | 1.75 | ±0.20 | 87.06 | 310/330 |
16.8 | +0.8 | 8.20 | ±0.40 | 1.75 | ±0.20 | 89.78 | 310/330 |
17.3 | +0.8 | 8.50 | ±0.40 | 1.75 | ±0.20 | 92.5 | 310/330 |
17.8 | +0.8 | 8.80 | ±0.40 | 1.75 | ±0.20 | 95.22 | 310/330 |
18.8 | +0.8 | 9.35 | ±0.40 | 2.00 | ±0.25 | 100.67 | 310/330 |
19.3 | +0.8 | 9.70 | ±0.40 | 2.00 | ±0.25 | 103.39 | 310/330 |
19.8 | +0.8 | 9.75 | ±0.50 | 2.00 | ±0.25 | 106.11 | 310/330 |
20.3 | +0.8 | 9.90 | ±0.50 | 2.00 | ±0.25 | 108.83 | 310/330 |
Carbide Rod with Three Helical Holes
Some special precise end mills or drills needs 3 helical holes to get better cutting performs, we specially develop carbide rod blanks for this application. Specifications detail as below:
Outer D (mm) |
OD Tol. (mm) |
TK (mm) |
Distance Tol. (mm) |
Inner Dia. (mm) |
ID (mm) |
Pitch (mm) |
Pitch Tol. (mm) |
|
6 | ﹢1.0/﹢0.6 | 2.75 | -0.4 | 0.7 | ±0.10 | 32.7 | -0.7 | 0.62 |
8 | ﹢1.4/﹢0.7 | 3 | -0.4 | 1 | ±0.15 | 43.53 | -0.86 | 0.89 |
10 | ﹢1.4/﹢0.7 | 5 | -0.6 | 1.4 | ±0.15 | 54.41 | -1.08 | 1.12 |
12 | ﹢1.4/﹢0.7 | 6 | -0.6 | 1.4 | ±0.15 | 65.3 | -1.3 | 1.33 |
14 | ﹢1.5/﹢0.7 | 7 | -0.8 | 1.75 | ±0.20 | 76.18 | -1.51 | 1.56 |
16 | ﹢1.6/﹢0.7 | 8 | -0.8 | 1.75 | ±0.20 | 87.06 | -1.73 | 1.78 |
18 | ﹢1.7/﹢0.7 | 9.55 | -0.8 | 2 | ±0.25 | 97.95 | -1.95 | 2.00 |
20 | ﹢1.7/﹢0.7 | 10 | -1 | 2 | ±0.25 | 108.83 | -2.16 | 2.22 |
Length: 330+0/+1.5mm |
Product detail pictures:
Related Product Guide:
abide by the contract", conforms towards the market requirement, joins during the market competition by its good quality likewise as provides additional comprehensive and great services for customers to let them turn out to be big winner. The pursue of your enterprise, is the clients' fulfillment for Factory source Two Helix Holes Carbide Rod - Carbide Rod With Coolant Hole – Toonney, The product will supply to all over the world, such as: New Zealand, Turin, Hungary, We are your reliable partner in international markets with the best quality products. Our advantages are innovation, flexibility and reliability which have been built during the last twenty years. We focus on providing service for our clients as a key element in strengthening our long-term relationships. Our continual availability of high grade products in combination with our excellent pre-sales and after-sales service ensures strong competitiveness in an increasingly globalized market.
By Meredith from Madrid - 2017.08.21 14:13
This is a very professional wholesaler, we always come to their company for procurement, good quality and cheap.
By Elaine from Brasilia - 2018.09.19 18:37