Factory Cheap Hot Carbide Rod H6 - Carbide Rod With Coolant Hole – Toonney
Factory Cheap Hot Carbide Rod H6 - Carbide Rod With Coolant Hole – Toonney Detail:
Carbide Rods with One Coolant Duct
This blank is specially for some CNC blades or drills which needs duct for coolant to cool the increased heat during the high speed cutting or drilling. Standard specification and tolerance table please reference below.
Outer D(mm) | OD Tol.(mm) | Inner Hole d(mm) | ID Tol.(mm) | Hole center diviation value α | Length(mm) | L Tol.(mm) |
3.0 | +0.50/+0.30 | 0.5 | ±0.10 | 0.10 | 330 | +1.5 |
4.0 | +0.50/+0.30 | 0.8 | ±0.10 | 0.10 | 330 | +1.5 |
5.0 | +0.50/+0.30 | 0.8 | ±0.10 | 0.13 | 330 | +1.5 |
6.0 | +0.50/+0.30 | 1.0 | ±0.15 | 0.15 | 330 | +1.5 |
7.0 | +0.60/+0.30 | 1.0 | ±0.15 | 0.15 | 330 | +1.5 |
8.0 | +0.60/+0.30 | 1.0 | ±0.15 | 0.15 | 330 | +1.5 |
9.0 | +0.60/+0.30 | 1.4 | ±0.15 | 0.20 | 330 | +1.5 |
10.0 | +0.60/+0.30 | 1.4 | ±0.15 | 0.20 | 330 | +1.5 |
11.0 | +0.60/+0.30 | 1.4 | ±0.15 | 0.28 | 330 | +1.5 |
12.0 | +0.60/+0.30 | 1.8 | ±0.15 | 0.30 | 330 | +1.5 |
13.0 | +0.70/+0.30 | 1.8 | ±0.15 | 0.34 | 330 | +1.5 |
14.0 | +0.70/+0.30 | 1.8 | ±0.15 | 0.37 | 330 | +1.5 |
15.0 | +0.70/+0.30 | 2.0 | ±0.20 | 0.40 | 330 | +1.5 |
16.0 | +0.70/+0.30 | 2.0 | ±0.20 | 0.40 | 330 | +1.5 |
17.0 | +0.80/+0.30 | 2.0 | ±0.20 | 0.47 | 330 | +1.5 |
18.0 | +0.80/+0.30 | 2.0 | ±0.20 | 0.50 | 330 | +1.5 |
19.0 | +0.80/+0.30 | 2.0 | ±0.20 | 0.50 | 330 | +1.5 |
20.0 | +0.80/+0.30 | 2.5 | ±0.25 | 0.50 | 330 | +1.5 |
21.0 | +0.80/+0.30 | 2.5 | ±0.25 | 0.50 | 330 | +1.5 |
22.0 | +0.80/+0.30 | 2.5 | ±0.25 | 0.50 | 330 | +1.5 |
23.0 | +0.80/+0.30 | 3.0 | ±0.25 | 0.50 | 330 | +1.5 |
24.0 | +0.80/+0.30 | 3.0 | ±0.25 | 0.50 | 330 | +1.5 |
25.0 | +0.80/+0.30 | 3.0 | ±0.25 | 0.50 | 330 | +1.5 |
26.0 | +0.80/+0.30 | 3.0 | ±0.25 | 0.50 | 330 | +1.5 |
27.0 | +0.80/+0.30 | 3.0 | ±0.25 | 0.50 | 330 | +1.5 |
28.0 | +0.80/+0.30 | 3.0 | ±0.25 | 0.50 | 330 | +1.5 |
29.0 | +0.80/+0.30 | 3.0 | ±0.25 | 0.50 | 330 | +1.5 |
30.0 | +0.80/+0.30 | 3.0 | ±0.25 | 0.50 | 330 | +1.5 |
Carbide Rod with Two Straight Holes
This blank is especially for some CNC blades or drills which needs duct for coolant to cool the increased heat during the high-speed cutting or drilling. Standard specification and tolerance table please reference below.
Standard pitch
Outside Dia. Ø(mm) | OD Tol. (mm) | Inner d(mm) | ID Tol.(mm) | Distance between holds | Hole center diviation value α | L mm | Tol. (mm) | |
mm | Tol. (mm) | |||||||
6.0 | +0.50/+0.30 | 0.8 | ±0.10 | 1.5 | ﹢0/-0.20 | 0.15 | 330 | +1.5 |
7.0 | +0.60/+0.30 | 0.8 | ±0.10 | 1.5 | ﹢0/-0.20 | 0.15 | 330 | +1.5 |
8.0 | +0.60/+0.30 | 1.0 | ±0.15 | 1.5 | ﹢0/-0.30 | 0.15 | 330 | +1.5 |
9.0 | +0.60/+0.30 | 1.0 | ±0.15 | 2.6 | ﹢0/-0.30 | 0.20 | 330 | +1.5 |
10.0 | +0.60/+0.30 | 1.0 | ±0.15 | 2.6 | ﹢0/-0.30 | 0.20 | 330 | +1.5 |
11.0 | +0.60/+0.30 | 1.2 | ±0.15 | 3.6 | ﹢0/-0.30 | 0.28 | 330 | +1.5 |
12.0 | +0.60/+0.30 | 1.2 | ±0.15 | 3.6 | ﹢0/-0.30 | 0.30 | 330 | +1.5 |
13.0 | +0.70/+0.30 | 1.2 | ±0.15 | 3.6 | ﹢0/-0.30 | 0.34 | 330 | +1.5 |
14.0 | +0.70/+0.30 | 1.5 | ±0.15 | 5.0 | ﹢0/-0.30 | 0.37 | 330 | +1.5 |
15.0 | +0.70/+0.30 | 1.5 | ±0.15 | 5.0 | ﹢0/-0.30 | 0.40 | 330 | +1.5 |
16.0 | +0.70/+0.30 | 1.5 | ±0.15 | 5.0 | ﹢0/-0.30 | 0.40 | 330 | +1.5 |
17.0 | +0.80/+0.30 | 2.0 | ±0.20 | 6.2 | ﹢0/-0.30 | 0.47 | 330 | +1.5 |
18.0 | +0.80/+0.30 | 2.0 | ±0.20 | 6.2 | ﹢0/-0.30 | 0.50 | 330 | +1.5 |
19.0 | +0.80/+0.30 | 2.0 | ±0.20 | 6.2 | ﹢0/-0.30 | 0.50 | 330 | +1.5 |
20.0 | +0.80/+0.30 | 2.0 | ±0.20 | 6.2 | ﹢0/-0.40 | 0.50 | 330 | +1.5 |
21.0 | +0.80/+0.30 | 2.0 | ±0.20 | 6.2 | ﹢0/-0.40 | 0.50 | 330 | +1.5 |
22.0 | +0.80/+0.30 | 2.0 | ±0.20 | 6.2 | ﹢0/-0.40 | 0.50 | 330 | +1.5 |
23.0 | +0.80/+0.30 | 2.0 | ±0.20 | 7.5 | ﹢0/-0.40 | 0.50 | 330 | +1.5 |
24.0 | +0.80/+0.30 | 2.0 | ±0.20 | 7.5 | ﹢0/-0.50 | 0.50 | 330 | +1.5 |
25.0 | +0.80/+0.30 | 2.0 | ±0.20 | 7.5 | ﹢0/-0.50 | 0.50 | 330 | +1.5 |
26.0 | +0.80/+0.30 | 2.0 | ±0.20 | 7.5 | ﹢0/-0.50 | 0.50 | 330 | +1.5 |
Carbide Rod with Two Helical Holes
Coolant hole in the type of helical shape is one new of our product series, below is the size detail.
D(mm) | D tol. | TK | Tk tol | hole | Hole tol. | Pitch | L+1.0 |
3.3 | +0.7 | 1.60 | ±0.10 | 0.40 | ±0.10 | 16.32 | 310/330 |
3.8 | +0.7 | 1.80 | ±0.10 | 0.50 | ±0.10 | 19.04 | 310/330 |
4.3 | +0.7 | 2.10 | ±0.10 | 0.60 | ±0.10 | 21.77 | 310/330 |
4.8 | +0.7 | 2.25 | ±0.15 | 0.70 | ±0.10 | 24.49 | 310/330 |
5.3 | +0.7 | 2.40 | ±0.20 | 0.70 | ±0.10 | 27.21 | 310/330 |
5.8 | +0.7 | 2.40 | ±0.20 | 0.70 | ±0.10 | 29.93 | 310/330 |
6.3 | +0.7 | 2.40 | ±0.20 | 0.70 | ±0.10 | 32.65 | 310/330 |
6.8 | +0.7 | 3.30 | ±0.20 | 1.00 | ±0.15 | 35.37 | 310/330 |
7.3 | +0.7 | 3.50 | ±0.20 | 1.00 | ±0.15 | 38.09 | 310/330 |
7.8 | +0.7 | 3.80 | ±0.20 | 1.00 | ±0.15 | 40.81 | 310/330 |
8.3 | +0.7 | 3.80 | ±0.20 | 1.00 | ±0.15 | 43.53 | 310/330 |
8.8 | +0.7 | 4.20 | ±0.30 | 1.00 | ±0.15 | 46.25 | 310/330 |
9.3 | +0.7 | 4.50 | ±0.30 | 1.40 | ±0.15 | 48.97 | 310/330 |
9.8 | +0.7 | 4.50 | ±0.30 | 1.40 | ±0.15 | 51.69 | 310/330 |
10.3 | +0.7 | 4.50 | ±0.30 | 1.40 | ±0.15 | 54.41 | 310/330 |
10.8 | +0.7 | 4.50 | ±0.30 | 1.40 | ±0.15 | 57.13 | 310/330 |
11.3 | +0.7 | 4.90 | ±0.40 | 1.40 | ±0.15 | 59.86 | 310/330 |
11.8 | +0.7 | 5.40 | ±0.40 | 1.40 | ±0.15 | 62.58 | 310/330 |
12.3 | +0.7 | 5.85 | ±0.40 | 1.40 | ±0.15 | 65.3 | 310/330 |
12.8 | +0.7 | 5.85 | ±0.40 | 1.75 | ±0.20 | 68.02 | 310/330 |
13.3 | +0.8 | 6.10 | ±0.40 | 1.75 | ±0.20 | 70.74 | 310/330 |
13.8 | +0.8 | 6.40 | ±0.40 | 1.75 | ±0.20 | 73.46 | 310/330 |
14.3 | +0.8 | 6.70 | ±0.40 | 1.75 | ±0.20 | 76.18 | 310/330 |
14.8 | +0.8 | 7.00 | ±0.40 | 1.75 | ±0.20 | 78.9 | 310/330 |
15.3 | +0.8 | 7.30 | ±0.40 | 1.75 | ±0.20 | 81.62 | 310/330 |
15.8 | +0.8 | 7.60 | ±0.40 | 1.75 | ±0.20 | 84.34 | 310/330 |
16.3 | +0.8 | 7.90 | ±0.40 | 1.75 | ±0.20 | 87.06 | 310/330 |
16.8 | +0.8 | 8.20 | ±0.40 | 1.75 | ±0.20 | 89.78 | 310/330 |
17.3 | +0.8 | 8.50 | ±0.40 | 1.75 | ±0.20 | 92.5 | 310/330 |
17.8 | +0.8 | 8.80 | ±0.40 | 1.75 | ±0.20 | 95.22 | 310/330 |
18.8 | +0.8 | 9.35 | ±0.40 | 2.00 | ±0.25 | 100.67 | 310/330 |
19.3 | +0.8 | 9.70 | ±0.40 | 2.00 | ±0.25 | 103.39 | 310/330 |
19.8 | +0.8 | 9.75 | ±0.50 | 2.00 | ±0.25 | 106.11 | 310/330 |
20.3 | +0.8 | 9.90 | ±0.50 | 2.00 | ±0.25 | 108.83 | 310/330 |
Carbide Rod with Three Helical Holes
Some special precise end mills or drills needs 3 helical holes to get better cutting performs, we specially develop carbide rod blanks for this application. Specifications detail as below:
Outer D (mm) |
OD Tol. (mm) |
TK (mm) |
Distance Tol. (mm) |
Inner Dia. (mm) |
ID (mm) |
Pitch (mm) |
Pitch Tol. (mm) |
|
6 | ﹢1.0/﹢0.6 | 2.75 | -0.4 | 0.7 | ±0.10 | 32.7 | -0.7 | 0.62 |
8 | ﹢1.4/﹢0.7 | 3 | -0.4 | 1 | ±0.15 | 43.53 | -0.86 | 0.89 |
10 | ﹢1.4/﹢0.7 | 5 | -0.6 | 1.4 | ±0.15 | 54.41 | -1.08 | 1.12 |
12 | ﹢1.4/﹢0.7 | 6 | -0.6 | 1.4 | ±0.15 | 65.3 | -1.3 | 1.33 |
14 | ﹢1.5/﹢0.7 | 7 | -0.8 | 1.75 | ±0.20 | 76.18 | -1.51 | 1.56 |
16 | ﹢1.6/﹢0.7 | 8 | -0.8 | 1.75 | ±0.20 | 87.06 | -1.73 | 1.78 |
18 | ﹢1.7/﹢0.7 | 9.55 | -0.8 | 2 | ±0.25 | 97.95 | -1.95 | 2.00 |
20 | ﹢1.7/﹢0.7 | 10 | -1 | 2 | ±0.25 | 108.83 | -2.16 | 2.22 |
Length: 330+0/+1.5mm |
Product detail pictures:
Related Product Guide:
We're commitment to offer you the aggressive cost ,superb products and solutions top quality, too as fast delivery for Factory Cheap Hot Carbide Rod H6 - Carbide Rod With Coolant Hole – Toonney, The product will supply to all over the world, such as: Mali, Mauritania, Ecuador, It using the world's leading system for reliable operation, a low failure rate, it suitable for Argentina customers choice. Our company is situated within the national civilized cities, the traffic is very convenient, unique geographical and economic conditions. We pursue a people-oriented, meticulous manufacturing, brainstorm, build brilliant" business philosophy. Strict quality management, perfect service, reasonable price in Argentina is our stand on the premise of competition. If necessary, welcome to contact us by our website or phone consultation, we will be happy to serve you.
By Sandy from Mauritania - 2017.12.09 14:01
Wide range, good quality, reasonable prices and good service, advanced equipment, excellent talents and continuously strengthened technology forces,a nice business partner.
By Janice from Russia - 2017.02.14 13:19