• sns01
  • sns02
  • sns03
English

China New Product Tungsten Carbide Gun Drill With Waist Hole - Carbide Rod With Coolant Hole – Toonney

China New Product Tungsten Carbide Gun Drill With Waist Hole - Carbide Rod With Coolant Hole – Toonney Featured Image
  • China New Product Tungsten Carbide Gun Drill With Waist Hole - Carbide Rod With Coolant Hole – Toonney

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We normally think and practice corresponding on the change of circumstance, and grow up. We aim at the achievement of a richer mind and body and also the living for Carbide Gun Drill, Cemented Carbide Rod With Y Shape Holes, Sintering Furnace For Magnetic Materials, Only for accomplish the good-quality product or service to satisfy customer's demand, all of our products have been strictly inspected before shipment.
China New Product Tungsten Carbide Gun Drill With Waist Hole - Carbide Rod With Coolant Hole – Toonney Detail:

iconCarbide Rods with One Coolant Duct

This blank is specially for some CNC blades or drills which needs duct for coolant to cool the increased heat during the high speed cutting or drilling. Standard specification and tolerance table please reference below.

Outer D(mm) OD Tol.(mm) Inner Hole d(mm) ID Tol.(mm) Hole center diviation value α Length（mm） L Tol.(mm)
3.0 +0.50/+0.30 0.5 ±0.10 0.10 330 +1.5
4.0 +0.50/+0.30 0.8 ±0.10 0.10 330 +1.5
5.0 +0.50/+0.30 0.8 ±0.10 0.13 330 +1.5
6.0 +0.50/+0.30 1.0 ±0.15 0.15 330 +1.5
7.0 +0.60/+0.30 1.0 ±0.15 0.15 330 +1.5
8.0 +0.60/+0.30 1.0 ±0.15 0.15 330 +1.5
9.0 +0.60/+0.30 1.4 ±0.15 0.20 330 +1.5
10.0 +0.60/+0.30 1.4 ±0.15 0.20 330 +1.5
11.0 +0.60/+0.30 1.4 ±0.15 0.28 330 +1.5
12.0 +0.60/+0.30 1.8 ±0.15 0.30 330 +1.5
13.0 +0.70/+0.30 1.8 ±0.15 0.34 330 +1.5
14.0 +0.70/+0.30 1.8 ±0.15 0.37 330 +1.5
15.0 +0.70/+0.30 2.0 ±0.20 0.40 330 +1.5
16.0 +0.70/+0.30 2.0 ±0.20 0.40 330 +1.5
17.0 +0.80/+0.30 2.0 ±0.20 0.47 330 +1.5
18.0 +0.80/+0.30 2.0 ±0.20 0.50 330 +1.5
19.0 +0.80/+0.30 2.0 ±0.20 0.50 330 +1.5
20.0 +0.80/+0.30 2.5 ±0.25 0.50 330 +1.5
21.0 +0.80/+0.30 2.5 ±0.25 0.50 330 +1.5
22.0 +0.80/+0.30 2.5 ±0.25 0.50 330 +1.5
23.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5
24.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5
25.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5
26.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5
27.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5
28.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5
29.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5
30.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5

iconCarbide Rod with Two Straight Holes

This blank is especially for some CNC blades or drills which needs duct for coolant to cool the increased heat during the high-speed cutting or drilling. Standard specification and tolerance table please reference below.

Standard pitch

Outside Dia. Ø(mm) OD Tol. (mm) Inner d(mm) ID Tol.(mm) Distance between holds Hole center diviation value α L mm Tol. (mm)
mm Tol. (mm)
6.0 +0.50/+0.30 0.8 ±0.10 1.5 ﹢0/-0.20 0.15 330 +1.5
7.0 +0.60/+0.30 0.8 ±0.10 1.5 ﹢0/-0.20 0.15 330 +1.5
8.0 +0.60/+0.30 1.0 ±0.15 1.5 ﹢0/-0.30 0.15 330 +1.5
9.0 +0.60/+0.30 1.0 ±0.15 2.6 ﹢0/-0.30 0.20 330 +1.5
10.0 +0.60/+0.30 1.0 ±0.15 2.6 ﹢0/-0.30 0.20 330 +1.5
11.0 +0.60/+0.30 1.2 ±0.15 3.6 ﹢0/-0.30 0.28 330 +1.5
12.0 +0.60/+0.30 1.2 ±0.15 3.6 ﹢0/-0.30 0.30 330 +1.5
13.0 +0.70/+0.30 1.2 ±0.15 3.6 ﹢0/-0.30 0.34 330 +1.5
14.0 +0.70/+0.30 1.5 ±0.15 5.0 ﹢0/-0.30 0.37 330 +1.5
15.0 +0.70/+0.30 1.5 ±0.15 5.0 ﹢0/-0.30 0.40 330 +1.5
16.0 +0.70/+0.30 1.5 ±0.15 5.0 ﹢0/-0.30 0.40 330 +1.5
17.0 +0.80/+0.30 2.0 ±0.20 6.2 ﹢0/-0.30 0.47 330 +1.5
18.0 +0.80/+0.30 2.0 ±0.20 6.2 ﹢0/-0.30 0.50 330 +1.5
19.0 +0.80/+0.30 2.0 ±0.20 6.2 ﹢0/-0.30 0.50 330 +1.5
20.0 +0.80/+0.30 2.0 ±0.20 6.2 ﹢0/-0.40 0.50 330 +1.5
21.0 +0.80/+0.30 2.0 ±0.20 6.2 ﹢0/-0.40 0.50 330 +1.5
22.0 +0.80/+0.30 2.0 ±0.20 6.2 ﹢0/-0.40 0.50 330 +1.5
23.0 +0.80/+0.30 2.0 ±0.20 7.5 ﹢0/-0.40 0.50 330 +1.5
24.0 +0.80/+0.30 2.0 ±0.20 7.5 ﹢0/-0.50 0.50 330 +1.5
25.0 +0.80/+0.30 2.0 ±0.20 7.5 ﹢0/-0.50 0.50 330 +1.5
26.0 +0.80/+0.30 2.0 ±0.20 7.5 ﹢0/-0.50 0.50 330 +1.5

iconCarbide Rod with Two Helical Holes

Coolant hole in the type of helical shape is one new of our product series, below is the size detail.

carbide-rod-with-three-helical-holes

D(mm) D tol. TK Tk tol hole Hole tol. Pitch L+1.0
3.3 +0.7 1.60 ±0.10 0.40 ±0.10 16.32 310/330
3.8 +0.7 1.80 ±0.10 0.50 ±0.10 19.04 310/330
4.3 +0.7 2.10 ±0.10 0.60 ±0.10 21.77 310/330
4.8 +0.7 2.25 ±0.15 0.70 ±0.10 24.49 310/330
5.3 +0.7 2.40 ±0.20 0.70 ±0.10 27.21 310/330
5.8 +0.7 2.40 ±0.20 0.70 ±0.10 29.93 310/330
6.3 +0.7 2.40 ±0.20 0.70 ±0.10 32.65 310/330
6.8 +0.7 3.30 ±0.20 1.00 ±0.15 35.37 310/330
7.3 +0.7 3.50 ±0.20 1.00 ±0.15 38.09 310/330
7.8 +0.7 3.80 ±0.20 1.00 ±0.15 40.81 310/330
8.3 +0.7 3.80 ±0.20 1.00 ±0.15 43.53 310/330
8.8 +0.7 4.20 ±0.30 1.00 ±0.15 46.25 310/330
9.3 +0.7 4.50 ±0.30 1.40 ±0.15 48.97 310/330
9.8 +0.7 4.50 ±0.30 1.40 ±0.15 51.69 310/330
10.3 +0.7 4.50 ±0.30 1.40 ±0.15 54.41 310/330
10.8 +0.7 4.50 ±0.30 1.40 ±0.15 57.13 310/330
11.3 +0.7 4.90 ±0.40 1.40 ±0.15 59.86 310/330
11.8 +0.7 5.40 ±0.40 1.40 ±0.15 62.58 310/330
12.3 +0.7 5.85 ±0.40 1.40 ±0.15 65.3 310/330
12.8 +0.7 5.85 ±0.40 1.75 ±0.20 68.02 310/330
13.3 +0.8 6.10 ±0.40 1.75 ±0.20 70.74 310/330
13.8 +0.8 6.40 ±0.40 1.75 ±0.20 73.46 310/330
14.3 +0.8 6.70 ±0.40 1.75 ±0.20 76.18 310/330
14.8 +0.8 7.00 ±0.40 1.75 ±0.20 78.9 310/330
15.3 +0.8 7.30 ±0.40 1.75 ±0.20 81.62 310/330
15.8 +0.8 7.60 ±0.40 1.75 ±0.20 84.34 310/330
16.3 +0.8 7.90 ±0.40 1.75 ±0.20 87.06 310/330
16.8 +0.8 8.20 ±0.40 1.75 ±0.20 89.78 310/330
17.3 +0.8 8.50 ±0.40 1.75 ±0.20 92.5 310/330
17.8 +0.8 8.80 ±0.40 1.75 ±0.20 95.22 310/330
18.8 +0.8 9.35 ±0.40 2.00 ±0.25 100.67 310/330
19.3 +0.8 9.70 ±0.40 2.00 ±0.25 103.39 310/330
19.8 +0.8 9.75 ±0.50 2.00 ±0.25 106.11 310/330
20.3 +0.8 9.90 ±0.50 2.00 ±0.25 108.83 310/330

iconCarbide Rod with Three Helical Holes

Some special precise end mills or drills needs 3 helical holes to get better cutting performs, we specially develop carbide rod blanks for this application. Specifications detail as below:
carbide-rod-with-three-helical-holes

Outer D
(mm)		 OD Tol.
(mm)		 TK
(mm)		 Distance Tol.
(mm)		 Inner Dia.
(mm)		 ID
(mm)		 Pitch
(mm)		 Pitch Tol.
(mm)
6 ﹢1.0/﹢0.6 2.75 -0.4 0.7 ±0.10 32.7 -0.7 0.62
8 ﹢1.4/﹢0.7 3 -0.4 1 ±0.15 43.53 -0.86 0.89
10 ﹢1.4/﹢0.7 5 -0.6 1.4 ±0.15 54.41 -1.08 1.12
12 ﹢1.4/﹢0.7 6 -0.6 1.4 ±0.15 65.3 -1.3 1.33
14 ﹢1.5/﹢0.7 7 -0.8 1.75 ±0.20 76.18 -1.51 1.56
16 ﹢1.6/﹢0.7 8 -0.8 1.75 ±0.20 87.06 -1.73 1.78
18 ﹢1.7/﹢0.7 9.55 -0.8 2 ±0.25 97.95 -1.95 2.00
20 ﹢1.7/﹢0.7 10 -1 2 ±0.25 108.83 -2.16 2.22
Length: 330+0/+1.5mm
Product detail pictures:

China New Product Tungsten Carbide Gun Drill With Waist Hole - Carbide Rod With Coolant Hole – Toonney detail pictures

Related Product Guide:
Sticking to the perception of "Creating products of top of the range and earning mates with people today from all over the world", we constantly put the desire of consumers in the first place for China New Product Tungsten Carbide Gun Drill With Waist Hole - Carbide Rod With Coolant Hole – Toonney, The product will supply to all over the world, such as: Myanmar, Detroit, Bogota, We are fully aware of our customer's needs. We provide high quality products, competitive prices and the first class service. We would like to establish good business relationships as well as friendship with you in the near future.
    • This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.
    5 Stars By Mabel from Belgium - 2017.05.02 18:28
    The product classification is very detailed that can be very accurate to meet our demand, a professional wholesaler.
    5 Stars By Ingrid from Senegal - 2018.12.28 15:18

    Related Products

    8 Year Exporter Cemented Carbide Block - Carbide Cutting Tools – Toonney

    8 Year Exporter Cemented Carbide Block - Carbi...

    Leading Manufacturer for Cemented Carbide Punching Die - Customized Tungsten Carbide Products – Toonney

    Leading Manufacturer for Cemented Carbide Punch...

    Short Lead Time for Sintering Furnace For Cemented Carbide - Sintering HIP Furnace – Toonney

    Short Lead Time for Sintering Furnace For Cemen...

    2021 Good Quality Lock Core Die - Progressive Die/Punching Die – Toonney

    2021 Good Quality Lock Core Die - Progressive ...

    factory low price Impact Resistant Forging Die - Heading Die – Toonney

    factory low price Impact Resistant Forging Die ...

    Reasonable price Cemented Carbide Heading Die Core For Bolt - Progressive Die/Punching Die – Toonney

    Reasonable price Cemented Carbide Heading Die C...