China Factory for Y Shape Holes Cemented Carbide Rod - Carbide Rod With Coolant Hole – Toonney

Short Description:

Product Detail

Product Tags

Feedback (2)

Our products are broadly identified and trustworthy by people and may meet continually modifying financial and social requires of Two Helix Holes Cemented Carbide Rod, 6 Flutes Ball Nose Endmill, Tungsten Carbide Heading Die Core For Screw, We sincerely look forward to hearing from you. Give us a chance to show you our professionalism and passion. We are sincerely welcome good friends from numerous circles at dwelling and abroad come to cooperate!

China Factory for Y Shape Holes Cemented Carbide Rod - Carbide Rod With Coolant Hole – Toonney Detail:

Carbide Rods with One Coolant Duct

This blank is specially for some CNC blades or drills which needs duct for coolant to cool the increased heat during the high speed cutting or drilling. Standard specification and tolerance table please reference below.

Outer D(mm)	OD Tol.(mm)	Inner Hole d(mm)	ID Tol.(mm)	Hole center diviation value α	Length（mm）	L Tol.(mm)
3.0	+0.50/+0.30	0.5	±0.10	0.10	330	+1.5
4.0	+0.50/+0.30	0.8	±0.10	0.10	330	+1.5
5.0	+0.50/+0.30	0.8	±0.10	0.13	330	+1.5
6.0	+0.50/+0.30	1.0	±0.15	0.15	330	+1.5
7.0	+0.60/+0.30	1.0	±0.15	0.15	330	+1.5
8.0	+0.60/+0.30	1.0	±0.15	0.15	330	+1.5
9.0	+0.60/+0.30	1.4	±0.15	0.20	330	+1.5
10.0	+0.60/+0.30	1.4	±0.15	0.20	330	+1.5
11.0	+0.60/+0.30	1.4	±0.15	0.28	330	+1.5
12.0	+0.60/+0.30	1.8	±0.15	0.30	330	+1.5
13.0	+0.70/+0.30	1.8	±0.15	0.34	330	+1.5
14.0	+0.70/+0.30	1.8	±0.15	0.37	330	+1.5
15.0	+0.70/+0.30	2.0	±0.20	0.40	330	+1.5
16.0	+0.70/+0.30	2.0	±0.20	0.40	330	+1.5
17.0	+0.80/+0.30	2.0	±0.20	0.47	330	+1.5
18.0	+0.80/+0.30	2.0	±0.20	0.50	330	+1.5
19.0	+0.80/+0.30	2.0	±0.20	0.50	330	+1.5
20.0	+0.80/+0.30	2.5	±0.25	0.50	330	+1.5
21.0	+0.80/+0.30	2.5	±0.25	0.50	330	+1.5
22.0	+0.80/+0.30	2.5	±0.25	0.50	330	+1.5
23.0	+0.80/+0.30	3.0	±0.25	0.50	330	+1.5
24.0	+0.80/+0.30	3.0	±0.25	0.50	330	+1.5
25.0	+0.80/+0.30	3.0	±0.25	0.50	330	+1.5
26.0	+0.80/+0.30	3.0	±0.25	0.50	330	+1.5
27.0	+0.80/+0.30	3.0	±0.25	0.50	330	+1.5
28.0	+0.80/+0.30	3.0	±0.25	0.50	330	+1.5
29.0	+0.80/+0.30	3.0	±0.25	0.50	330	+1.5
30.0	+0.80/+0.30	3.0	±0.25	0.50	330	+1.5

Carbide Rod with Two Straight Holes

This blank is especially for some CNC blades or drills which needs duct for coolant to cool the increased heat during the high-speed cutting or drilling. Standard specification and tolerance table please reference below.

Standard pitch

Outside Dia. Ø(mm)	OD Tol. (mm)	Inner d(mm)	ID Tol.(mm)	Distance between holds		Hole center diviation value α	L mm	Tol. (mm)
Outside Dia. Ø(mm)	OD Tol. (mm)	Inner d(mm)	ID Tol.(mm)	mm	Tol. (mm)	Hole center diviation value α	L mm	Tol. (mm)
6.0	+0.50/+0.30	0.8	±0.10	1.5	﹢0/-0.20	0.15	330	+1.5
7.0	+0.60/+0.30	0.8	±0.10	1.5	﹢0/-0.20	0.15	330	+1.5
8.0	+0.60/+0.30	1.0	±0.15	1.5	﹢0/-0.30	0.15	330	+1.5
9.0	+0.60/+0.30	1.0	±0.15	2.6	﹢0/-0.30	0.20	330	+1.5
10.0	+0.60/+0.30	1.0	±0.15	2.6	﹢0/-0.30	0.20	330	+1.5
11.0	+0.60/+0.30	1.2	±0.15	3.6	﹢0/-0.30	0.28	330	+1.5
12.0	+0.60/+0.30	1.2	±0.15	3.6	﹢0/-0.30	0.30	330	+1.5
13.0	+0.70/+0.30	1.2	±0.15	3.6	﹢0/-0.30	0.34	330	+1.5
14.0	+0.70/+0.30	1.5	±0.15	5.0	﹢0/-0.30	0.37	330	+1.5
15.0	+0.70/+0.30	1.5	±0.15	5.0	﹢0/-0.30	0.40	330	+1.5
16.0	+0.70/+0.30	1.5	±0.15	5.0	﹢0/-0.30	0.40	330	+1.5
17.0	+0.80/+0.30	2.0	±0.20	6.2	﹢0/-0.30	0.47	330	+1.5
18.0	+0.80/+0.30	2.0	±0.20	6.2	﹢0/-0.30	0.50	330	+1.5
19.0	+0.80/+0.30	2.0	±0.20	6.2	﹢0/-0.30	0.50	330	+1.5
20.0	+0.80/+0.30	2.0	±0.20	6.2	﹢0/-0.40	0.50	330	+1.5
21.0	+0.80/+0.30	2.0	±0.20	6.2	﹢0/-0.40	0.50	330	+1.5
22.0	+0.80/+0.30	2.0	±0.20	6.2	﹢0/-0.40	0.50	330	+1.5
23.0	+0.80/+0.30	2.0	±0.20	7.5	﹢0/-0.40	0.50	330	+1.5
24.0	+0.80/+0.30	2.0	±0.20	7.5	﹢0/-0.50	0.50	330	+1.5
25.0	+0.80/+0.30	2.0	±0.20	7.5	﹢0/-0.50	0.50	330	+1.5
26.0	+0.80/+0.30	2.0	±0.20	7.5	﹢0/-0.50	0.50	330	+1.5

Carbide Rod with Two Helical Holes

Coolant hole in the type of helical shape is one new of our product series, below is the size detail.

carbide-rod-with-three-helical-holes

D(mm)	D tol.	TK	Tk tol	hole	Hole tol.	Pitch	L+1.0
3.3	+0.7	1.60	±0.10	0.40	±0.10	16.32	310/330
3.8	+0.7	1.80	±0.10	0.50	±0.10	19.04	310/330
4.3	+0.7	2.10	±0.10	0.60	±0.10	21.77	310/330
4.8	+0.7	2.25	±0.15	0.70	±0.10	24.49	310/330
5.3	+0.7	2.40	±0.20	0.70	±0.10	27.21	310/330
5.8	+0.7	2.40	±0.20	0.70	±0.10	29.93	310/330
6.3	+0.7	2.40	±0.20	0.70	±0.10	32.65	310/330
6.8	+0.7	3.30	±0.20	1.00	±0.15	35.37	310/330
7.3	+0.7	3.50	±0.20	1.00	±0.15	38.09	310/330
7.8	+0.7	3.80	±0.20	1.00	±0.15	40.81	310/330
8.3	+0.7	3.80	±0.20	1.00	±0.15	43.53	310/330
8.8	+0.7	4.20	±0.30	1.00	±0.15	46.25	310/330
9.3	+0.7	4.50	±0.30	1.40	±0.15	48.97	310/330
9.8	+0.7	4.50	±0.30	1.40	±0.15	51.69	310/330
10.3	+0.7	4.50	±0.30	1.40	±0.15	54.41	310/330
10.8	+0.7	4.50	±0.30	1.40	±0.15	57.13	310/330
11.3	+0.7	4.90	±0.40	1.40	±0.15	59.86	310/330
11.8	+0.7	5.40	±0.40	1.40	±0.15	62.58	310/330
12.3	+0.7	5.85	±0.40	1.40	±0.15	65.3	310/330
12.8	+0.7	5.85	±0.40	1.75	±0.20	68.02	310/330
13.3	+0.8	6.10	±0.40	1.75	±0.20	70.74	310/330
13.8	+0.8	6.40	±0.40	1.75	±0.20	73.46	310/330
14.3	+0.8	6.70	±0.40	1.75	±0.20	76.18	310/330
14.8	+0.8	7.00	±0.40	1.75	±0.20	78.9	310/330
15.3	+0.8	7.30	±0.40	1.75	±0.20	81.62	310/330
15.8	+0.8	7.60	±0.40	1.75	±0.20	84.34	310/330
16.3	+0.8	7.90	±0.40	1.75	±0.20	87.06	310/330
16.8	+0.8	8.20	±0.40	1.75	±0.20	89.78	310/330
17.3	+0.8	8.50	±0.40	1.75	±0.20	92.5	310/330
17.8	+0.8	8.80	±0.40	1.75	±0.20	95.22	310/330
18.8	+0.8	9.35	±0.40	2.00	±0.25	100.67	310/330
19.3	+0.8	9.70	±0.40	2.00	±0.25	103.39	310/330
19.8	+0.8	9.75	±0.50	2.00	±0.25	106.11	310/330
20.3	+0.8	9.90	±0.50	2.00	±0.25	108.83	310/330

Carbide Rod with Three Helical Holes

Some special precise end mills or drills needs 3 helical holes to get better cutting performs, we specially develop carbide rod blanks for this application. Specifications detail as below:
carbide-rod-with-three-helical-holes

Outer D (mm)	OD Tol. (mm)	TK (mm)	Distance Tol. (mm)	Inner Dia. (mm)	ID (mm)	Pitch (mm)	Pitch Tol. (mm)
6	﹢1.0/﹢0.6	2.75	-0.4	0.7	±0.10	32.7	-0.7	0.62
8	﹢1.4/﹢0.7	3	-0.4	1	±0.15	43.53	-0.86	0.89
10	﹢1.4/﹢0.7	5	-0.6	1.4	±0.15	54.41	-1.08	1.12
12	﹢1.4/﹢0.7	6	-0.6	1.4	±0.15	65.3	-1.3	1.33
14	﹢1.5/﹢0.7	7	-0.8	1.75	±0.20	76.18	-1.51	1.56
16	﹢1.6/﹢0.7	8	-0.8	1.75	±0.20	87.06	-1.73	1.78
18	﹢1.7/﹢0.7	9.55	-0.8	2	±0.25	97.95	-1.95	2.00
20	﹢1.7/﹢0.7	10	-1	2	±0.25	108.83	-2.16	2.22
Length: 330+0/+1.5mm

Product detail pictures:

Related Product Guide:

Our corporation insists all along the quality policy of "product top quality is base of organization survival; purchaser pleasure will be the staring point and ending of an company; persistent improvement is eternal pursuit of staff" plus the consistent purpose of "reputation very first, purchaser first" for China Factory for Y Shape Holes Cemented Carbide Rod - Carbide Rod With Coolant Hole – Toonney, The product will supply to all over the world, such as: Germany, Chile, Auckland, we are now looking forward to even greater cooperation with overseas customers based on mutual benefits. We will work wholeheartedly to improve our products and services. We also promise to work jointly with business partners to elevate our cooperation to a higher level and share success together. Warmly welcome you to visit our factory sincerely.

Carbide Preform For Cutting Tools

Carbide Rod With Three Helix Holes

Cemented Carbide Preform

Cemented Carbide Rod For Cutting Tools

Cemented Carbide Rod In Sintered Condition

Tungsten Carbide Gun Drill With Waist Hole

Tungsten Carbide Preform For Cutting Tools

Tungsten Carbide T Preform

Two Helix Holes Carbide Rod

Waist Hole Cemented Carbide Gun Drill

The quality of the products is very good, especially in the details, can be seen that the company work actively to satisfy customer's interest, a nice supplier.