China Cheap price Carbide Rod Ground - Carbide Rod With Coolant Hole – Toonney
China Cheap price Carbide Rod Ground - Carbide Rod With Coolant Hole – Toonney Detail:
Carbide Rods with One Coolant Duct
This blank is specially for some CNC blades or drills which needs duct for coolant to cool the increased heat during the high speed cutting or drilling. Standard specification and tolerance table please reference below.
Outer D(mm) | OD Tol.(mm) | Inner Hole d(mm) | ID Tol.(mm) | Hole center diviation value α | Length(mm) | L Tol.(mm) |
3.0 | +0.50/+0.30 | 0.5 | ±0.10 | 0.10 | 330 | +1.5 |
4.0 | +0.50/+0.30 | 0.8 | ±0.10 | 0.10 | 330 | +1.5 |
5.0 | +0.50/+0.30 | 0.8 | ±0.10 | 0.13 | 330 | +1.5 |
6.0 | +0.50/+0.30 | 1.0 | ±0.15 | 0.15 | 330 | +1.5 |
7.0 | +0.60/+0.30 | 1.0 | ±0.15 | 0.15 | 330 | +1.5 |
8.0 | +0.60/+0.30 | 1.0 | ±0.15 | 0.15 | 330 | +1.5 |
9.0 | +0.60/+0.30 | 1.4 | ±0.15 | 0.20 | 330 | +1.5 |
10.0 | +0.60/+0.30 | 1.4 | ±0.15 | 0.20 | 330 | +1.5 |
11.0 | +0.60/+0.30 | 1.4 | ±0.15 | 0.28 | 330 | +1.5 |
12.0 | +0.60/+0.30 | 1.8 | ±0.15 | 0.30 | 330 | +1.5 |
13.0 | +0.70/+0.30 | 1.8 | ±0.15 | 0.34 | 330 | +1.5 |
14.0 | +0.70/+0.30 | 1.8 | ±0.15 | 0.37 | 330 | +1.5 |
15.0 | +0.70/+0.30 | 2.0 | ±0.20 | 0.40 | 330 | +1.5 |
16.0 | +0.70/+0.30 | 2.0 | ±0.20 | 0.40 | 330 | +1.5 |
17.0 | +0.80/+0.30 | 2.0 | ±0.20 | 0.47 | 330 | +1.5 |
18.0 | +0.80/+0.30 | 2.0 | ±0.20 | 0.50 | 330 | +1.5 |
19.0 | +0.80/+0.30 | 2.0 | ±0.20 | 0.50 | 330 | +1.5 |
20.0 | +0.80/+0.30 | 2.5 | ±0.25 | 0.50 | 330 | +1.5 |
21.0 | +0.80/+0.30 | 2.5 | ±0.25 | 0.50 | 330 | +1.5 |
22.0 | +0.80/+0.30 | 2.5 | ±0.25 | 0.50 | 330 | +1.5 |
23.0 | +0.80/+0.30 | 3.0 | ±0.25 | 0.50 | 330 | +1.5 |
24.0 | +0.80/+0.30 | 3.0 | ±0.25 | 0.50 | 330 | +1.5 |
25.0 | +0.80/+0.30 | 3.0 | ±0.25 | 0.50 | 330 | +1.5 |
26.0 | +0.80/+0.30 | 3.0 | ±0.25 | 0.50 | 330 | +1.5 |
27.0 | +0.80/+0.30 | 3.0 | ±0.25 | 0.50 | 330 | +1.5 |
28.0 | +0.80/+0.30 | 3.0 | ±0.25 | 0.50 | 330 | +1.5 |
29.0 | +0.80/+0.30 | 3.0 | ±0.25 | 0.50 | 330 | +1.5 |
30.0 | +0.80/+0.30 | 3.0 | ±0.25 | 0.50 | 330 | +1.5 |
Carbide Rod with Two Straight Holes
This blank is especially for some CNC blades or drills which needs duct for coolant to cool the increased heat during the high-speed cutting or drilling. Standard specification and tolerance table please reference below.
Standard pitch
Outside Dia. Ø(mm) | OD Tol. (mm) | Inner d(mm) | ID Tol.(mm) | Distance between holds | Hole center diviation value α | L mm | Tol. (mm) | |
mm | Tol. (mm) | |||||||
6.0 | +0.50/+0.30 | 0.8 | ±0.10 | 1.5 | ﹢0/-0.20 | 0.15 | 330 | +1.5 |
7.0 | +0.60/+0.30 | 0.8 | ±0.10 | 1.5 | ﹢0/-0.20 | 0.15 | 330 | +1.5 |
8.0 | +0.60/+0.30 | 1.0 | ±0.15 | 1.5 | ﹢0/-0.30 | 0.15 | 330 | +1.5 |
9.0 | +0.60/+0.30 | 1.0 | ±0.15 | 2.6 | ﹢0/-0.30 | 0.20 | 330 | +1.5 |
10.0 | +0.60/+0.30 | 1.0 | ±0.15 | 2.6 | ﹢0/-0.30 | 0.20 | 330 | +1.5 |
11.0 | +0.60/+0.30 | 1.2 | ±0.15 | 3.6 | ﹢0/-0.30 | 0.28 | 330 | +1.5 |
12.0 | +0.60/+0.30 | 1.2 | ±0.15 | 3.6 | ﹢0/-0.30 | 0.30 | 330 | +1.5 |
13.0 | +0.70/+0.30 | 1.2 | ±0.15 | 3.6 | ﹢0/-0.30 | 0.34 | 330 | +1.5 |
14.0 | +0.70/+0.30 | 1.5 | ±0.15 | 5.0 | ﹢0/-0.30 | 0.37 | 330 | +1.5 |
15.0 | +0.70/+0.30 | 1.5 | ±0.15 | 5.0 | ﹢0/-0.30 | 0.40 | 330 | +1.5 |
16.0 | +0.70/+0.30 | 1.5 | ±0.15 | 5.0 | ﹢0/-0.30 | 0.40 | 330 | +1.5 |
17.0 | +0.80/+0.30 | 2.0 | ±0.20 | 6.2 | ﹢0/-0.30 | 0.47 | 330 | +1.5 |
18.0 | +0.80/+0.30 | 2.0 | ±0.20 | 6.2 | ﹢0/-0.30 | 0.50 | 330 | +1.5 |
19.0 | +0.80/+0.30 | 2.0 | ±0.20 | 6.2 | ﹢0/-0.30 | 0.50 | 330 | +1.5 |
20.0 | +0.80/+0.30 | 2.0 | ±0.20 | 6.2 | ﹢0/-0.40 | 0.50 | 330 | +1.5 |
21.0 | +0.80/+0.30 | 2.0 | ±0.20 | 6.2 | ﹢0/-0.40 | 0.50 | 330 | +1.5 |
22.0 | +0.80/+0.30 | 2.0 | ±0.20 | 6.2 | ﹢0/-0.40 | 0.50 | 330 | +1.5 |
23.0 | +0.80/+0.30 | 2.0 | ±0.20 | 7.5 | ﹢0/-0.40 | 0.50 | 330 | +1.5 |
24.0 | +0.80/+0.30 | 2.0 | ±0.20 | 7.5 | ﹢0/-0.50 | 0.50 | 330 | +1.5 |
25.0 | +0.80/+0.30 | 2.0 | ±0.20 | 7.5 | ﹢0/-0.50 | 0.50 | 330 | +1.5 |
26.0 | +0.80/+0.30 | 2.0 | ±0.20 | 7.5 | ﹢0/-0.50 | 0.50 | 330 | +1.5 |
Carbide Rod with Two Helical Holes
Coolant hole in the type of helical shape is one new of our product series, below is the size detail.
D(mm) | D tol. | TK | Tk tol | hole | Hole tol. | Pitch | L+1.0 |
3.3 | +0.7 | 1.60 | ±0.10 | 0.40 | ±0.10 | 16.32 | 310/330 |
3.8 | +0.7 | 1.80 | ±0.10 | 0.50 | ±0.10 | 19.04 | 310/330 |
4.3 | +0.7 | 2.10 | ±0.10 | 0.60 | ±0.10 | 21.77 | 310/330 |
4.8 | +0.7 | 2.25 | ±0.15 | 0.70 | ±0.10 | 24.49 | 310/330 |
5.3 | +0.7 | 2.40 | ±0.20 | 0.70 | ±0.10 | 27.21 | 310/330 |
5.8 | +0.7 | 2.40 | ±0.20 | 0.70 | ±0.10 | 29.93 | 310/330 |
6.3 | +0.7 | 2.40 | ±0.20 | 0.70 | ±0.10 | 32.65 | 310/330 |
6.8 | +0.7 | 3.30 | ±0.20 | 1.00 | ±0.15 | 35.37 | 310/330 |
7.3 | +0.7 | 3.50 | ±0.20 | 1.00 | ±0.15 | 38.09 | 310/330 |
7.8 | +0.7 | 3.80 | ±0.20 | 1.00 | ±0.15 | 40.81 | 310/330 |
8.3 | +0.7 | 3.80 | ±0.20 | 1.00 | ±0.15 | 43.53 | 310/330 |
8.8 | +0.7 | 4.20 | ±0.30 | 1.00 | ±0.15 | 46.25 | 310/330 |
9.3 | +0.7 | 4.50 | ±0.30 | 1.40 | ±0.15 | 48.97 | 310/330 |
9.8 | +0.7 | 4.50 | ±0.30 | 1.40 | ±0.15 | 51.69 | 310/330 |
10.3 | +0.7 | 4.50 | ±0.30 | 1.40 | ±0.15 | 54.41 | 310/330 |
10.8 | +0.7 | 4.50 | ±0.30 | 1.40 | ±0.15 | 57.13 | 310/330 |
11.3 | +0.7 | 4.90 | ±0.40 | 1.40 | ±0.15 | 59.86 | 310/330 |
11.8 | +0.7 | 5.40 | ±0.40 | 1.40 | ±0.15 | 62.58 | 310/330 |
12.3 | +0.7 | 5.85 | ±0.40 | 1.40 | ±0.15 | 65.3 | 310/330 |
12.8 | +0.7 | 5.85 | ±0.40 | 1.75 | ±0.20 | 68.02 | 310/330 |
13.3 | +0.8 | 6.10 | ±0.40 | 1.75 | ±0.20 | 70.74 | 310/330 |
13.8 | +0.8 | 6.40 | ±0.40 | 1.75 | ±0.20 | 73.46 | 310/330 |
14.3 | +0.8 | 6.70 | ±0.40 | 1.75 | ±0.20 | 76.18 | 310/330 |
14.8 | +0.8 | 7.00 | ±0.40 | 1.75 | ±0.20 | 78.9 | 310/330 |
15.3 | +0.8 | 7.30 | ±0.40 | 1.75 | ±0.20 | 81.62 | 310/330 |
15.8 | +0.8 | 7.60 | ±0.40 | 1.75 | ±0.20 | 84.34 | 310/330 |
16.3 | +0.8 | 7.90 | ±0.40 | 1.75 | ±0.20 | 87.06 | 310/330 |
16.8 | +0.8 | 8.20 | ±0.40 | 1.75 | ±0.20 | 89.78 | 310/330 |
17.3 | +0.8 | 8.50 | ±0.40 | 1.75 | ±0.20 | 92.5 | 310/330 |
17.8 | +0.8 | 8.80 | ±0.40 | 1.75 | ±0.20 | 95.22 | 310/330 |
18.8 | +0.8 | 9.35 | ±0.40 | 2.00 | ±0.25 | 100.67 | 310/330 |
19.3 | +0.8 | 9.70 | ±0.40 | 2.00 | ±0.25 | 103.39 | 310/330 |
19.8 | +0.8 | 9.75 | ±0.50 | 2.00 | ±0.25 | 106.11 | 310/330 |
20.3 | +0.8 | 9.90 | ±0.50 | 2.00 | ±0.25 | 108.83 | 310/330 |
Carbide Rod with Three Helical Holes
Some special precise end mills or drills needs 3 helical holes to get better cutting performs, we specially develop carbide rod blanks for this application. Specifications detail as below:
Outer D (mm) |
OD Tol. (mm) |
TK (mm) |
Distance Tol. (mm) |
Inner Dia. (mm) |
ID (mm) |
Pitch (mm) |
Pitch Tol. (mm) |
|
6 | ﹢1.0/﹢0.6 | 2.75 | -0.4 | 0.7 | ±0.10 | 32.7 | -0.7 | 0.62 |
8 | ﹢1.4/﹢0.7 | 3 | -0.4 | 1 | ±0.15 | 43.53 | -0.86 | 0.89 |
10 | ﹢1.4/﹢0.7 | 5 | -0.6 | 1.4 | ±0.15 | 54.41 | -1.08 | 1.12 |
12 | ﹢1.4/﹢0.7 | 6 | -0.6 | 1.4 | ±0.15 | 65.3 | -1.3 | 1.33 |
14 | ﹢1.5/﹢0.7 | 7 | -0.8 | 1.75 | ±0.20 | 76.18 | -1.51 | 1.56 |
16 | ﹢1.6/﹢0.7 | 8 | -0.8 | 1.75 | ±0.20 | 87.06 | -1.73 | 1.78 |
18 | ﹢1.7/﹢0.7 | 9.55 | -0.8 | 2 | ±0.25 | 97.95 | -1.95 | 2.00 |
20 | ﹢1.7/﹢0.7 | 10 | -1 | 2 | ±0.25 | 108.83 | -2.16 | 2.22 |
Length: 330+0/+1.5mm |
Product detail pictures:
Related Product Guide:
To regularly increase the management program by virtue from the rule of "sincerely, good religion and high quality are the base of enterprise development", we greatly absorb the essence of linked products internationally, and constantly produce new goods to satisfy the calls for of shoppers for China Cheap price Carbide Rod Ground - Carbide Rod With Coolant Hole – Toonney, The product will supply to all over the world, such as: Greece, United Arab Emirates, Marseille, All our staffs believe that: Quality builds today and service creates future. We know that good quality and the best service are the only way for us to achieve our customers and to achieve ourselves too. We welcome customers all over the word to contact us for future business relationships. Our products are the best. Once Selected, Perfect Forever!
By Eleanore from Argentina - 2017.01.28 19:59
We are a small company that has just started, but we get the company leader's attention and gave us a lot of help. Hope we can make progress together!
By Elvira from New Zealand - 2018.12.28 15:18