close
+86 592 7797922 +86 592 6771943
toonneyalloy@yahoo.com|sales@tncarbide.com
Toonney Alloy(Xiamen) Co.,Ltd.
Carbide Grade

Carbide Grade

Carbide Rods with One Coolant Duct Carbide Rods with Two Coolant Ducts, Straight
This blank is especially for some CNC blades or drills which needs duct for coolant to cool the increased heat during the high-speed cutting or drilling. Standard specification and tolerance table please reference below.

Outer            D(mm) OD    Tol.(mm) Inner Hole    d(mm) ID  Tol.(mm) Hole center deviation value α Length(mm) L     Tol.(mm)
3.0 +0.50/+0.30 0.5 ±0.10 0.10 330 +1.5
4.0 +0.50/+0.30 0.8 ±0.10 0.10 330 +1.5
5.0 +0.50/+0.30 0.8 ±0.10 0.13 330 +1.5
6.0 +0.50/+0.30 1.0 ±0.15 0.15 330 +1.5
7.0 +0.60/+0.30 1.0 ±0.15 0.15 330 +1.5
8.0 +0.60/+0.30 1.0 ±0.15 0.15 330 +1.5
9.0 +0.60/+0.30 1.4 ±0.15 0.20 330 +1.5
10.0 +0.60/+0.30 1.4 ±0.15 0.20 330 +1.5
11.0 +0.60/+0.30 1.4 ±0.15 0.28 330 +1.5
12.0 +0.60/+0.30 1.8 ±0.15 0.30 330 +1.5
13.0 +0.70/+0.30 1.8 ±0.15 0.34 330 +1.5
14.0 +0.70/+0.30 1.8 ±0.15 0.37 330 +1.5
15.0 +0.70/+0.30 2.0 ±0.20 0.40 330 +1.5
16.0 +0.70/+0.30 2.0 ±0.20 0.40 330 +1.5
17.0 +0.80/+0.30 2.0 ±0.20 0.47 330 +1.5
18.0 +0.80/+0.30 2.0 ±0.20 0.50 330 +1.5
19.0 +0.80/+0.30 2.0 ±0.20 0.50 330 +1.5
20.0 +0.80/+0.30 2.5 ±0.25 0.50 330 +1.5
21.0 +0.80/+0.30 2.5 ±0.25 0.50 330 +1.5
22.0 +0.80/+0.30 2.5 ±0.25 0.50 330 +1.5
23.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5
24.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5
25.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5
26.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5
27.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5
28.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5
29.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5
30.0 +0.80/+0.30 3.0 ±0.25 0.50 330 +1.5
This blank is especially for some CNC blades or drills which needs duct for coolant to cool the increased heat during the high-speed cutting or drilling. Standard specification and tolerance table please reference below.

 Standard pitch

Outside Dia.            Ø(mm) OD Tol. (mm) Inner d(mm) ID Tol.(mm) Distance between holds Hole center diviation value α L mm Tol. (mm)
mm Tol. (mm)
6.0 +0.50/+0.30 0.8 ±0.10 1.5 ﹢0/-0.20 0.15 330 +1.5
7.0 +0.60/+0.30 0.8 ±0.10 1.5 ﹢0/-0.20 0.15 330 +1.5
8.0 +0.60/+0.30 1.0 ±0.15 1.5 ﹢0/-0.30 0.15 330 +1.5
9.0 +0.60/+0.30 1.0 ±0.15 2.6 ﹢0/-0.30 0.20 330 +1.5
10.0 +0.60/+0.30 1.0 ±0.15 2.6 ﹢0/-0.30 0.20 330 +1.5
11.0 +0.60/+0.30 1.2 ±0.15 3.6 ﹢0/-0.30 0.28 330 +1.5
12.0 +0.60/+0.30 1.2 ±0.15 3.6 ﹢0/-0.30 0.30 330 +1.5
13.0 +0.70/+0.30 1.2 ±0.15 3.6 ﹢0/-0.30 0.34 330 +1.5
14.0 +0.70/+0.30 1.5 ±0.15 5.0 ﹢0/-0.30 0.37 330 +1.5
15.0 +0.70/+0.30 1.5 ±0.15 5.0 ﹢0/-0.30 0.40 330 +1.5
16.0 +0.70/+0.30 1.5 ±0.15 5.0 ﹢0/-0.30 0.40 330 +1.5
17.0 +0.80/+0.30 2.0 ±0.20 6.2 ﹢0/-0.30 0.47 330 +1.5
18.0 +0.80/+0.30 2.0 ±0.20 6.2 ﹢0/-0.30 0.50 330 +1.5
19.0 +0.80/+0.30 2.0 ±0.20 6.2 ﹢0/-0.30 0.50 330 +1.5
20.0 +0.80/+0.30 2.0 ±0.20 6.2 ﹢0/-0.40 0.50 330 +1.5
21.0 +0.80/+0.30 2.0 ±0.20 6.2 ﹢0/-0.40 0.50 330 +1.5
22.0 +0.80/+0.30 2.0 ±0.20 6.2 ﹢0/-0.40 0.50 330 +1.5
23.0 +0.80/+0.30 2.0 ±0.20 7.5 ﹢0/-0.40 0.50 330 +1.5
24.0 +0.80/+0.30 2.0 ±0.20 7.5 ﹢0/-0.50 0.50 330 +1.5
25.0 +0.80/+0.30 2.0 ±0.20 7.5 ﹢0/-0.50 0.50 330 +1.5
26.0 +0.80/+0.30 2.0 ±0.20 7.5 ﹢0/-0.50 0.50 330 +1.5
Leave a Message Email Us

we will contact you within 24 hours.

  • TEL:+86 592 7797922
  • FAX:+86 592 6771943
  • EMAIL:toonneyalloy@yahoo.com
  • ADDRESS:No.61, Lianshang Road, Guannan Industrial District, Jimei District, Xiamen, Fujian, China